335142
17
Zoom out
Zoom in
Previous page
1/68
Next page
GB
The glue applied on the gaskets leaves traces of
grease on the glass. Before using the appliance, we
recommend you remove these with a special non-
abrasive cleaning product. During the first few hours
of use there may be a smell of rubber which will
disappear very quickly.
A few seconds after the hob is connected to the
electricity supply, a buzzer will sound. The hob may
now be switched on.
Switching on the hob
To switch the hob on, press and hold the button
for approximately one second.
Switching on the cooking zones
Each cooking zone is controlled by a device
consisting of two buttons (- and +).
Press the
button to activate the hotplate, then
set the power to the required level using the
and buttons.
To set the power to maximum, hold down the
button briefly.
It is possible to accelerate the heating-up time of
a cooking zone as follows:
1. Adjust the power of the cooking zone so that
it is at the maximum level (9).
2. Press the
button: A appears on the
power level display.
3. At this point, set the desired power level to be
implemented for the actual cooking procedure (5,
for example).
When the correct temperature has been reached,
the rapid heating function stops automatically and
cooking continues normally at power level 5.
Switching on the extendable cooking
zones*
Double hotplate:
1. Press the
button to switch on the smaller
internal cooking zone.
2. Press the
button to switch the second
cooking zone on (or off).
Triple hotplate:
1. Press the
button to switch on the
intermediate cooking zone.
2. Press the
button twice to switch on the
entire cooking zone.
To revert to a smaller-sized cooking zone, press
the
button again.
Switching off the cooking zones
Press the button: the power of the cooking
zone will progressively decrease until it is
switched off.
Alternatively, the
and buttons may be
pressed simultaneously. This immediately returns
the power setting to 0 and the cooking zone
switches off.
Control panel lock
When the hob is switched on, it is possible to lock
the oven controls to avoid accidental changes being
made to the settings (by children, during cleaning,
etc.). Press the
button to lock the control panel:
the indicator light above the button will switch on.
To use any of the controls (e.g. to stop cooking),
you must switch off this function. Press the
button for a few moments, the indicator light will
switch off and the lock function will be removed.
Switching off the hob
Press the button to switch the appliance off.
If the control panel lock has been activated, the
controls will continue to be locked even after the hob
is switched on again. In order to switch the hob on
again, you must first remove the lock function.
Start-up and use
* Only available in certain models
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Indesit tk 64 id ix at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Indesit tk 64 id ix in the language / languages: English, Dutch, French, Italian, Portuguese, Spanish, Spanish as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info