Manual Indesit taan 5 fnf fnf s (page 17 of 72) (English, German, Dutch, French, Italian)

348882

Zoom out

Zoom in

1/72

Start-up and use

Starting the appliance

! After transportation of the appliance, carefully place it in an

upright position and wait at least 3 hours before connecting

it to the electricity mains, to make sure it operates as it

should.

 Clean the inside of the refrigerator well using warm water

and bicarbonate of soda before placing food inside it.



The appliance comes with a motor protection control

system which makes the compressor start

approximately 8 minutes after being switched on. The

compressor also starts each time the power supply is

cut off whether voluntarily or involuntarily (blackout).

Freezer Compartment

When the product is switched on the freezer compartment is

set to its default value of -18°C. We recommend that the

SUPER FREEZE function is set (the freezer status bar

continues to display the set value) in order to accelerate the

cooling process of the compartment; when the inside of the

compartment has reached its optimal temperature the

function will be deactivated and the food may be placed

inside.

Refrigerator Compartment

When the appliance is switched on the refrigerator

compartment is set to its default value of +5°C. We

recommend that the SUPER COOL function is set (the

refrigerator status bar continues to display the set value) in

order to accelerate the cooling process of the compartment.

After a few hours it will be cool enough for food to be placed

inside.

Navigating the display

Setting the temperatures:

If the product is switched on, the refrigerator and freezer

status bars will indicate the temperatures set at that

moment. To change them, simply press the

and

buttons

corresponding to the compartment for which you wish to

change the set temperature. More specifically, each time one

of the buttons is pressed the temperature is increased or

decreased by 1°, and the level of cold is adjusted

accordingly.The temperature values that may be selected for

the refrigerator compartment are +12°C, +7°C, +6°C, +5°C,

+4°C, +3°C and +2°C, while the values that may be set for

the freezer are -18°C, -19°C, -120°C, -21°C, -22°C, -24°C

and -26°C.

The temperatures are automatically set to +5°C for the

refrigerator compartment and -18°C for the freezer

compartment (these are standard food storage values.

When the ECO function is active, the appliance

automatically adjusts the temperatures according to the

conditions inside and outside the refrigerator; the operation

of this function is signalled by the text AUTO.

Whenever it is necessary to activate the ECO function at

temperatures that are different to the standard storage

values, the ECO button must be pressed as soon as the

function is activated and held down while the new

temperatures are set using the

and

buttons. Under

these conditions, the temperatures may be set to 4°C, 5°C

and 6°C for the refrigerator compartment and -18°C, -19°C

and -20°C for the freezer compartment.

When the HOLIDAY function is active the temperature may

not be adjusted, however the appliance adjusts itself

automatically so that the optimal settings for the situation are

used: +12°C for the refrigerator compartment and -18°C for

the freezer compartment. This function is indicated by the

text.

To activate and deactivate the functions simply press the

relevant button and the function status will be signalled by

the corresponding LED switching on or off.

Several functions (SUPER COOL, SUPER FREEZE,

BOTTLE CHILL

, ECO) are incompatible with others

(HOLIDAY,...); remember that there is a pre-set order of

priority which will help you to use the product in the best

possible way.

When the BOTTLE CHILL function has finished, press the

BOTTLE CHILL button to stop the corresponding LED from

flashing and to silence the sound signal. This flashing and

sound signal indicates that the function is complete and that

the bottle should be removed from the freezer compartment.

Child Lock

In order to activate the Child Lock function, the Child Lock

button must be pressed for 2 seconds; the activation of the

button lock is confirmed by a short beep and the illumination

of the corresponding LED.

To deactivate the function, press the Child Lock button for 2

seconds; deactivation will be confirmed by a short beep and

by the corresponding LED switching off.

! The FREEZER status bar is also used to indicate an

unusual temperature increase in the freezer

compartment (see Troubleshooting).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Indesit taan 5 fnf fnf s in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 4,03 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Indesit taan 5 fnf fnf s Manual

Product: