GB
21
Building-in
Inside the oven there is a plastic bag with fixing
material. Take this bag out of the oven. BEFORE
USING THE OVEN, REMOVE THE PLASTIC
PROTECTION ANGLES ON THE GLASS DOOR (IF
EQUIPPED)
1. Fasten metal strip (A) using the two 13 mm. screws
(all of which can be found in the accessory bag).
The appliance needs sufficient ventilation. Make an
opening in the plinth at least 280 cm2 large for this
purpose.
2. Remove the 2 screws (x) from the fastening bar
under the microwave oven.
3. Fit the fastening bar (B) at the correct position in
the recess. Make sure that there is the same
amount of free space at each side of the fastening
bar. Fasten the fastening bar using the two 16 mm.
screws (H) which can be found in the accessory
bag.
Fix the fastening bar such that the two lips stick out
over the edge of the bottom of the recess and rest
against it at the front.
50 min.
320 min.
550 min.