71961
20
Zoom out
Zoom in
Previous page
1/48
Next page
9
BURNER AND NOZZLE SPECIFICATIONS
* At 15°C and 1013 mbar-dry gas
Propane G31 H.s. = 50,37 MJ/kg
Butane G30 H.s. = 49,47 MJ/kg
Methane G20 H.s. = 37,78 MJ/m
3
1elbaTsagdiuqiLsaglarutaN
renruBretemaiD
)mm(
rewoplamrehT
)*.s.H(Wk
ssap-yB
001/1
)mm(
elzzoN
001/1
)mm(
*wolF
h/g
elzzoN
001/1
)mm(
*wolF
h/l
.nimoN.cudeR03G13G02G
CdipaR00100.37.00468812412611682
Bdipar-imeS5756.14.0034602181169751
AyrailixuA5500.13.0720537171759
DgnirelpirT03152.33.17519632232421903
ylppuS
erusserp
037302
THE APPLIANCE MUST BE EARTHED
The appliance is designed to work with alternating current
at the supply voltage and frequency indicated on the rating
plate (situated on the rear part of the appliance and on the
last page of the instruction manual). Make sure that the
local supply voltage corresponds to the voltage indicated
on the rating plate.
Connecting the supply cable to the mains electricity
supply
For models supplied without a plug, fit a standard plug,
suitable for the load indicated on the rating plate, onto the
cable and connect it to a suitable socket.
To connect directly to the mains supply, an omnipolar circuit-
breaker with a contact separation of at least 3 mm suitable
for the load and complying with current standards and
regulations must be fitted between the appliance and the
mains supply outlet.
The yellow-green earth wire must not be interrupted by
the switch.
The supply cable must be in such a position so that no
part of it can reach a temperature of 50 °C above room
temperature.
All appliances should be connected seperately.
Do not use reducers, adapters or shunts as they could
cause heating or burning.
Before connecting to the power supply, make sure that:
the limiter valve and the domestic system can withstand
the load from the appliance (see rating plate);
the supply system is efficiently earthed according to
standards and laws in force;
the socket or omnipolar circuit-breaker are easily
accessible when the appliance is installed.
FAILURE TO OBSERVE THE ACCIDENT-PREVENTION
REGULATIONS RELIEVES THE MANUFACTURER OF ALL
LIABILITY.
Replacing the cable
Use a rubber cable of the type H05VV-F with a cross section
of 3 x 1,5 mm² .
The yellow-green earth wire must be 2 ÷ 3 cm longer than
the other wires.
ELECTRICAL CONNECTION
This appliance conforms to the following European Economic
Community directives:
- 73/23/EEC of 19/02/73 (Low Voltage) and subsequent
modifications;
- 89/336/EEC of 03/05/89 (Electromagnetic Compatibility) and
subsequent modifications;
- 90/396/EEC of 29/06/90 (Gas) and subsequent modifications;
- 93/68/EEC of 22/07/93 and subsequent modifications.
TECHNICAL SPECIFICATIONS
ENERGY LABEL
Directive 2002/40/EC on the label of electric ovens
Norm EN 50304
Energy consumption for Natural convection
heating mode: Convection ( only for mod. KP 688 MS)
Declared energy consumption for Forced convection Class
heating mode: Fan assisted
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Indesit KP 648 MS BX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Indesit KP 648 MS BX in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info