4593

Indesit IDL 500 S EU.2 Manual

17
Zoom out
Zoom in
Previous page
1/80
Next page
17
EN
Starting the dishwasher
1. Turn the water tap on.
2. Press the ON/OFF button: the indicator light will
illuminate.
3. Open the door and pour in a suitable amount of
detergent (
see below
).
4. Load the racks (
see Loading the racks
) and shut
the door.
5. Select the desired wash cycle depending on the
dishes and how dirty they are (
see table of wash
cycles
), by turning the SELECT WASH CYCLE knob
clockwise.
6. Start the cycle by pressing the START/RESET
button: the WASH CYCLE PHASE indicator lights
display the status of the cycle:
pre-wash, wash, rinses, drying
7. At the end of the wash cycle the drying phase
indicator light flashes..
8. Switch off the appliance by pressing the ON/OFF
button, shut off the water tap and unplug the
appliance from the electricity socket.
9. Open the door and wait for a few minutes before
removing the crockery, in order to avoid burns.
Unload the racks, beginning with the lower level.
Modifying a wash cycle already in progress
If the wrong programme was chosen, it may be
changed within one minute from switching on: press
and hold the START/RESET button for 4 seconds. The
WASH CYCLE PHASE indicator light will go out: Select
the new cycle and switch the machine back on by
pressing the START/RESET button.
! The knob must be turned clockwise from wash cycle
1 to 5, an anti-clockwise from wash cycle 5 to 1.
Adding extra crockery
Press the ON/OFF button and open the door, taking
care to avoid the escaping steam, and place the
crockery inside the dishwasher. Press the ON/OFF
button again: the cycle starts from the point at which it
was interrupted.
Accidental interruptions
If the door is opened during the wash cycle, or if there
is a power cut, the cycle stops. It starts again from
the point at which it was interrupted once the door has
been shut or the electricity supply is restored.
Loading the detergent
A successful wash also depends on the correct
amount of detergent being used, as recommended
by the manufacturer. Exceeding the recommended
amount does not result in a more effective wash and
pollutes the environment.
compartment Acompartment A
compartment Acompartment A
compartment A: Washing detergent
compartment Bcompartment B
compartment Bcompartment B
compartment B: Pre-wash detergent
1. Open cover C by
pressing button D.
2. Pour in the detergent
after consulting the
Wash cycle table
:
• for powder detergent
use compartments A
and B
• for tablets, use
compartment A and the
bottom of the
appliance, i.e. when the
cycle requires 1 tablet, place it in compartment A
and close the cover; when it requires 2, place the
second tablet at the bottom of the appliance.
3. Remove detergent residues from the edges of the
compartment and close the cover until it clicks.
A
B
D
C
Start-up and use
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Indesit IDL 500 S EU.2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Indesit IDL 500 S EU.2 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 9,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info