Manual Indesit idca 835 b (page 14 of 80) (English, German, Dutch, French, Italian)

303719

Zoom out

Zoom in

1/80

Disconnecting the power supply

 Disconnect the dryer when not in use or during cleaning

and maintenance operations.

Cleaning the filter after each cycle

The filter is a fundamental component of the dryer: its

function is to collect lint and fluff that form during drying.

Clean the filter once drying is completed, by rinsing it under

running water or cleaning it with a vacuum cleaner. Should the

filter become clogged, the flow of air inside the dryer will be

seriously hampered: drying times becomes longer and more

energy is consumed. Moreover, the dryer may become

damaged.

The filter is located in front of the dryer seal (see Picture).

Removing the filter:

1. Pull the filters plastic

handle upwards (see

Picture).

2. Clean the fluff off the filter

and replace it correctly.

Ensure that the filter is

placed flush with the dryer

seal.

 Do not use the dryer

unless the filter has been

replaced in its holder.

Checking the drum after each cycle

Rotate the drum manually to remove smaller items

(handkerchiefs) that could have been left inside the dryer.

Cleaning the drum

 Avoid using abrasives, steel wool or stainless steel

cleaning agents to clean the drum.

A coloured film may appear on the stainless steel drum

surface: it may be caused by a combination of water and/or

cleaning agents such as wash-softeners. This coloured film

does not affect the dryers performance.

Emptying the water container after

each cycle

Remove the water container and empty it into a sink or

other suitable drain outlet, then replace it correctly.

Always check the water container and empty it before

starting a new drying cycle.

Cleaning the condenser unit

 Remove the condenser unit regularly (monthly) and clean

off any fluff deposits from the plates by rinsing it with cold

water running on the rear end of the condenser.

Removing the condenser:

1. Disconnect the dryer from the power supply and open the

door.

2. Open the condenser cover (see Picture), unlock the three

catches by turning them 90° anti-clockwise, then pull on

the grip to remove the condenser.

3. Clean the surface of the seals and replace the unit with the

arrows pointing upwards, while making sure that the

catches are securely fixed.

Cleaning the tumble dryer

 The external metal and plastic parts and the rubber parts

can be cleaned with the aid of a damp cloth.

 Clean the front air intake grille regularly (every 6 months)

with a vacuum cleaner to remove any lint, fluff or dust

deposits. Furthermore, remove any lint deposits from the

front part of the condenser and from the filter area, using a

vacuum cleaner every so often.

 Do not use solvents or abrasives.

 The dryer uses ball bearing components that do not

require lubrication.

 Have the dryer checked regularly by authorised technical

personnel in order to ensure that the electrical and

mechanical parts work safely (see Assistance).

Water

container

Condenser unit

Condenser cover

Catches

Filter

Handle

Air intake

Ta p

Rear

Front

Condenser unit

Care and maintenance

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Indesit idca 835 b in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 2,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Indesit idca 835 b Manual

Product: