796415
14
Zoom out
Zoom in
Previous page
1/96
Next page
EN - 14
If you will not use your fridge for a long time (e.g. in summer holidays), put the thermostat to “•”
position. After defrosting, clean your fridge and leave the door open to prevent humidity and smell.
If the problem persists after you have followed all the instructions above, please consult to the
nearest Authorised Service.
The appliance you have purchased is designed for home type use and can be used only at home
and for the stated purposes. It is not suitable for commercial or common use. If the consumer use
the appliance in a way that does not comply with these features, we emphasise that the producer
and the dealer shall not be responsible for any repair and failure within the guarantee period.
Tips For Saving Energy
1. Install the appliance in a cool, well ventilated room , but not in direct sunlight and not near heat sour-
ce (radiator, cooker.. etc). Otherwise use an insulating plate.
2. Allow ward food and drinks to cool down outside the appliance.
3. When thawing frozen food, place it in the refrigerator compartment. The low temperature of the
frozen food will help to cool the refrigerator compartment when it is thawing. So it causes energy
saving. If the frozen food is put out, it causes wastage of energy.
4. When placing, drinks and slops they must be covered. Otherwise humidity increases at the applian-
ce. Therefore the working time gets longer. Also covering drinks and slops helps to save smell and
taste.
5. When placing food and drinks, open the appliance door as briey as possible.
6. Keep close the covers of any different temperature compartment in the appliance (crisper, chiller
...etc ).
7. Door gasket must be clean and pliable. Replace gaskets if worn.
8. It is possible to store more food by removing freezer shelf. Energy consumption is declared with
maximum load and without freezer shelf.
Electrical information (For UK type plug)
Warning! This appliancemust be earthed.
The mains lead of this appliance has been tted with a specially earthed plug.
Impotant: Do not use the appliance without the fuse cover in position. Should the fuse need
to be replaced, it must be replaced with a 13A fuse, ASTA approved to BS1362.
The plug must be used with a specially easrthed socker of 13 amperes. If there is no such socket in
your house, please have one installed by an authorised electrician.
The mains lead of this appliance has been tted with a BS 1363A 13A fused plug.
To change a fuse in this type of plug, of plug, follow the steps below:
1. Remove the fuse cover and fuse.
2. Fit replacement 13A fuse, ASTA apptoved to BS1362 type, into the fuse cover.
3. Replace fuse cover.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Indesit I55TM 4120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Indesit I55TM 4120 in the language / languages: English, German, Dutch, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 5.3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info