46850
9
Zoom out
Zoom in
Previous page
1/16
Next page
7
GB
Turning on the Appliance
How to start a wash cycle…
After performing all the operations described in the previous
chapters, turn the water tap on completely, press ON-OFF
button "A" situated on the control panel, indicator light "B"
comes on.
The display turns on and the 3 dashes appear, indicating that
the dishwasher is awaiting instructions.
Starting and setting the cycle.
Turn the cycle selector "M" until the reference notch on the
knob corresponds with the symbol or number of the cycle
you wish to set (consult the wash cycle table contained in
this manual, especially when first using the appliance).
After a few seconds, a beep indicates the wash cycle has
started and indicator "G" displays the phase with which it
has begun. The counter "L" will indicate the amount of time
left until the end of the wash cycle.
Cancelling or modifying a wash cycle in progress…..
Premise: a wash cycle in progress can only be modified if it
hasn't been running for long.
To modify a wash cycle in progress, turn knob "M" until it
reaches the RESET position.
After a few seconds, you will hear 4 beeps, indicator "G"
relating to the phase under way will come off and 3 dashes
will appear. At this point, all the settings will have been
cancelled.
To select a new wash cycle, repeat the instructions contained
in the paragraph entitled "Starting and setting the cycle"
If you have left out a dish…
You can interrupt a wash cycle by pressing the ON-OFF button,
then place the forgotten dishes into the appliance, which
will start up from where it was interrupted when you turn it
back on.
Cycle phase underway indicator
Your dishwasher is equipped with an indicator "G" comprising
4 symbols which represent the different phases of a wash
cycle. When the wash cycle has started, the display will indi-
cate the phases underway in sequence.
These phases are:
pre-wash, wash, rinses, drying.
At the end of the wash cycle….
The end of the wash cycle is signalled by 2 beeps, and a
flashing "END" will come up on the display. Bring the selector
back to the RESET position, and the 3 dashes for
programming cancellation will appear.
Turn the appliance off by pressing the ON-OFF button, turn
off the water tap and open the door. Wait a few minutes
before removing the dishes: this way you won't have to
handle them while they're still hot and they will dry better.
How to eliminate the drying phase.
To eliminate the drying phase from the wash cycle you wish
to start, just turn the knob to the Reset position then first
and foremost set any preferences as to:
Þ upper or lower rack
Þ delayed start
Start the wash cycle by following the instructions. Symbol
relating to the drying phase will flash for approximately
4 seconds; immediately press button "I" and the symbol will
disappear, thus indicating that the drying phase has been
eliminated.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Indesit DE73 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Indesit DE73 in the language / languages: English as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info