Manual Indesit DE43 (page 8 of 16) (English)

46848

Zoom out

Zoom in

1/16

Turning on the Appliance

How to start a wash cycle

After performing all the operations described in the previous

chapters, turn the water tap on completely, press ON-OFF

button "A"; you will hear a short beep and indicator light

"B" will come on.

The display turns on and 3 dashes appear: these indicate

that the appliance is awaiting instructions.

Starting and setting the cycle.

Turn the cycle selector "M" until the reference notch on the

knob corresponds with the symbol or number of the cycle

you wish to set (consult the wash cycle table contained in

this manual, especially when first using the appliance).

After a few seconds, a beep indicates the wash cycle has

started and indicator "G" displays the symbol corresponding

to the phase with which it has begun. The counter "L" will

indicate the estimated amount of time left until the end of

the wash cycle.

Do not expect a precise countdown as the wash cycle starts

with an estimated cycle time that is updated as the cycle

progresses and according to a number of parameters that

affect the cycle itself (such as water hardness, the tempera-

ture of the water, the degree of soil, etc.).

You want to wash on one rack only? Remember to use

half the amount of detergent.

If you only have a few dishes to wash, you can load these

onto one rack only, saving on both water and electricity.

Press button "I", a beep will sound and indicator "N" appears

on the display. Each time you press the button, a beep will

sound and symbol corresponding to the upper rack or

symbol corresponding to the lower rack will appear. If

you press the button once more, the selection will be reset

and the dishwasher will consequently wash on both racks.

To use the racks correctly, we recommend you read the

chapter entitled "Loading the dishes".

Cycle phase under way indicator

Your dishwasher is equipped with an indicator "G"

comprising 4 symbols which represent the different phases

of a wash cycle. When the wash cycle has started, the display

will indicate the phases under way in sequence.

These phases are:

pre-wash wash rinses drying

Cancelling and modifying a wash cycle in progress

Premise: a wash cycle in progress can only be modified if it

hasn't been running for long.

To modify it, turn the knob and set it to RESET. After a few

seconds, you will hear 4 beeps, indicator "G" relating to the

phase under way will turn off and 3 dashes will appear. At

this point, all the settings will have been cancelled.

To select a new wash cycle, repeat the instructions contained

in the paragraph entitled "Starting and setting the cycle".

You've left out a dish?

You can interrupt a wash cycle by pressing the "ON-OFF"

button, then place the forgotten dishes into the appliance,

which will start up from where it was interrupted when you

turn it back on.

There's been a power failure? Have you opened the

dishwasher door?

The wash cycle stops and then restarts when the electricity

comes back on or when you shut the door.

How to programme extra drying.

If you want your dishes to be perfectly dry, follow the

instructions below.

Set the knob to RESET and make any specific settings, such

as:

- upper or lower rack

- delayed start

Start the wash cycle by turning the knob and open the

appliance door. Observe symbol for drying: it will flash

for about 4 seconds, while the word "OFF" appears on the

display (extra drying disabled).

If you press button "I" immediately, you will hear a prolonged

beep and the word "ON" will appear on the display: the

extra drying has been enabled.

Once you have made your selection, shut the appliance door;

a beep will sound and the wash cycle will either start

immediately or after the delay, wherever set.

Remember that with extra drying, the wash cycle will last

longer, to provide you with drier dishes.

At the end of the wash cycle

At the end of the wash cycle, 2 beeps are sounded and the

word END flashes. Bring the selector back to the RESET

position, and the 3 dashes for programming cancellation

will appear.

Turn the appliance off by pressing the ON-OFF button, turn

off the water tap and open the door. Wait a few minutes

before removing the dishes: this way you won't have to

handle them while they're still hot and they will dry better.

Empty the bottom rack first.

Make sure the wash cycle has ended before removing the

dishes!

Warning

If opening the door soon after the end of the programme,or

during it, stand away from the Dishwasher, to avoid possible

injury from hot steam.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Indesit DE43 in the language / languages: English as an attachment in your email.

The manual is 0,45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Indesit DE43 Manual

Product: