697386

In Lite SHUTTER 2 Manual

8
Zoom out
Zoom in
Previous page
1/15
Next page
EN
The already installed lamp means the xture is immediately ready for
use. Therefore you do not need to install the lamp rst.
General Installation Guideline
During installation, make sure that all components are easily
accessible for replacement.
Important!
100-230V wall xtures may only be installed by a certied electrician.
Step 1
Switch off the electricity circuit to which the xture will be connected.
Use a voltage meter to check if power has been eliminated from elec-
trical wires that will be used to connect the xture.
Step 2
Remove the Torx screw (A). (Fig. 5a) Remove the cap of the xture by
turning in the direction of the arrow. (Fig. 5b)
Step 3
Pass the electricity wires through the hole and attach the back part
of the xture to the wall using the accompanying screws (B). (Fig. 6)
When doing so, remove the white connecting blocks if necessary (Fig.
6)
Important!
The accompanying screws are not suitable for connecting to an elec-
trical cabinet.
Step 4
Place the cap of the xture on the hooks in the back panel. Assemble
the power wires. (Fig. 7)
Step 5
Re-attach the xture to the assembly plate. The hooks can remain in
place. Tighten the Torx screw. Switch on the electrical circuit.
General maintenance advice
We advise you to clean the xture at least once a year using a clean
cloth and warm water. During cleaning activities, switch off the elec-
tricity circuit to which the xture is connected.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for In Lite SHUTTER 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of In Lite SHUTTER 2 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info