Manual In Lite DB-LED (page 7 of 14) (English, German, Dutch, French, Spanish)

697356

Zoom out

Zoom in

1/14

Connecting the xture to 12 V

The already installed lamp means the xture is immediately ready for

use. Therefore you do not need to install the lamp rst.

This xture can be built into various sorts of decorative paving, such

as concrete or natural stone, or wooden constructions such as deck-

ing, walls, fences, pond edges etc.

Step 1

For installation in wood use a suitable saw/drill to saw/drill holes with

a diameter of 22 mm / 0.87 inches. If working with stone or similar ma-

terials, use a diamond drill bit (Ø 22,4 mm / 0.88 inches), available from

your dealer. Drill holes where appropriate before beginning to t the

xture. (Fig. 1)

Step 2

Feed the connector for the xture through the hole and then carefully

insert the xture into the recess. Use a clean synthetic hammer to do

this. (Fig. 2)

NB: If the hole is too small you can cut a bit off each of the ribs.

Step 3

Join the Easy-Lock connector to the main cable. (Fig. 3)

a. Clamp the cable duct on top of the main cable.

b. Place the cable duct (with the cable at the bottom) in the Easy-

Lock connector.

c. Tighten the threaded cap on the Easy-Lock connector. This will

cause the contacts to be pushed through the insulation on the

cable. In tightening the cap, a little gel is applied to the contacts in

the Easy-Lock connector. This serves to protect the contacts

against moisture. A little gel may possibly come out of the Easy-

Lock connector: so after installation (and/or before a meal), wash

your hands with soap and water, and avoid the gel coming into

contact with your eyes.

Step 4

Install the Easy-Lock directly below the hole in the sand bed. That way

you can easily reach it whenever necessary.

Step 5

Connect the power cable to the xture by connecting the mini-

connector. (Fig. 4)

If the lamp does not work correctly, check that the Easy-Lock connec-

tor is properly connected to the main cable. Do the same for the mini-

connector. Repeat steps 3, 4 and 5. When the xture is connected to

the main cable also check that the contacts of the Easy-Lock connec-

tor are not bent. If you have any problems, contact your dealer.

General maintenance advice

We advise wiping the xture down at least once a year using a clean

cloth and warm water.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of In Lite DB-LED in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0,27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

In Lite DB-LED Manual

Product: