551485
56
Zoom out
Zoom in
Previous page
1/68
Next page
Water nozzle
The water nozzle b, located in the
cooking compartment between the top
heater elements has several spray
holes. These holes are susceptible to
limescale, especially in hard water
areas. The water nozzle will need to
descaled on a regular basis, more often
than is the case with the heater
elements and steam generator (see
"Descaling").
Proceed as follows:
^
Loosen nut a at the front end of the
water nozzle until you are able to
swing butt strap b to one side, and
release the flat front end of the water
nozzle.
^ Using pliers turn the water nozzle
around 180°. You will be able to grip
it better from this position.
^
Now pull the water nozzle out of its
socket c at the rear of the cooking
compartment. If it is difficult to
remove you may need to use the
pliers again.
^
Soak the water nozzle in a solution of
descaling agent until all the spray
holes in the side are free of limescale.
If necessary use a needle to remove
the limescale. Use the CC-Descaling
agent supplied with the appliance or
a suitable proprietary descaling
agent (e.g. one suitable for use in
coffee machines) and follow the
manufacturer's instructions on the
packaging.
^ After descaling, rinse the spray arm
out thoroughly with clean water and
leave to dry.
^ Re-fit it in its socket and secure it at
the front using butt strap b and nut
a.
Cleaning and care
56
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Imperial MDG 5.64-1 U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Imperial MDG 5.64-1 U in the language / languages: English as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info