551483

Imperial BDGL8664-3 UT Manual

71
Zoom out
Zoom in
Previous page
1/84
Next page
. . . cakes or biscuits are unevenly
browned
There will always be a slight
unevenness. Product information
sheets give a percentage result for
standard browning tests. These refer to
results for one tray.
If browning is very uneven, check:
With Fan heat D:
–
whether the temperature was set too
high,
–
whether the roasting filter was in
place,
– whether the correct runner height
was used,
– whether the sloping edge of the tray
was at the front.
With Conventional heating A:
– the colour and composition of the
baking tins being used. Light
coloured, shiny, or thin walled tins
are less suitable,
–
whether the correct runner height
was used,
–
whether the wir rack was used.
. . . spots like rust appear on catalytic
liners
When roasting on the rack, the
circulating air sometimes picks up
spices, which are then deposited on
the oven interior walls. These residues
are not removed by catalytic cleaning,
and should be removed while fresh with
a mild solution of hot water and
washing up liquid applied with a soft
brush.
. . . there has been a power cut and
"12:00" and the triangle - are
flashing underneath the m symbol
All pre-set times are deleted as a result
of the power failure.
^
Enter the time of day again, and any
other pre-set data.
..."F" and a number appear in the
oven display
This combination indicates a fault.
–
"F54": the roast probe is defective.
Remove the probe from its socket
and the message will disappear.
–"F55": the oven has automatically
switched itself off during use. This is
a safety feature to protect the oven if
it has been operating for an
exceedingly long period. The length
of time depends on the oven function
selected.
The oven can be used again immedi-
ately by simply turning the oven
function selector to "0" and then
entering the process again.
–
If any other fault message appears
in the display, you should call the
Service Dept.
Problem solving
71
… 71 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Imperial BDGL8664-3 UT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Imperial BDGL8664-3 UT in the language / languages: English as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info