647465
12
Zoom out
Zoom in
Previous page
1/48
Next page
12
R
F
X
U
F
X
R
U
A
B
C
X
F
R
A
B
C
A1) Burners of the hob
1. Remove the grill, the caps and the burners from the worktop.
2. Lift the worktop.
3. Unscrew the screw “F” and remove the pipe “R”.
4. Unscrew the injectors (U) and replace them with those suitable for the gas used, supplied with the cooker. See TABLE 2.
5. The air is adjusted by means of the pipe “R” according to the value “X” given in TABLE 2 for the primary air opening.
Once regulation has been completed, secure the pipe ”R” with the screw “F”.
A2) Air adjustment
The air adjustment must be carried out with the burner ignited and the flame to the maximum.
Examples (Fig.10):
A) Flame with excess of air; it is small and thin. Move sleeve R forward.
B) Flame with lack of air; it is irregular with yellow streaks. Move sleeve R backward.
C) Normal ame: its colour is light blue.
Figure 8 Figure 9 Figure 10
B1) Burner in the oven
1. Remove the bottom shelf of the oven
2. Remove the xing screws to move the burner
3. Unscrew the injectors and replace it with one suitable for the gas used. See table 2.
4. Unscrew the screw “f”.
5. The burner air must be adjusted by means of the pipe “r” according to the value ”x” given in table 2 for the
“primary air opening”.
6. Once regulation has been completed, secure the pipe “r” with the screw “f”.
B2) Air adjustment
The air adjustment must be carried out with the burner ignited and the flame to the maximum.
Examples (Fig.12):
D) Flame with excess of air; it is small and thin. Move sleeve R forward.
E) Flame with lack of air; it is irregular with yellow streaks. Move sleeve R backward.
F) Normal ame: its colour is light blue.
Figure 11 Figure 12
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ilve UPD120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ilve UPD120 in the language / languages: English as an attachment in your email.

The manual is 2,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info