Manual Ilve UP60 (page 23 of 48) (English)

647452

Zoom out

Zoom in

1/48

WARNING

The effect that top burner flame size should be adjusted so it does not extend beyond the edge of the cooking utensil.

This is an instruction based on safety considerations.

Figure 31 - 32 - 33

USE OF THE COUP FEU

The large “Coup feu” solid cast iron plate made of concentric rings allows you to rest the pan (or even several pans)

directly on the surface (Fig. 32, 33). It is heated by means of a gas burner (Fig. 31). The plate is designed to provide

a moderately intense heat which is well distributed over the surface. This is ideal for slow cooking and particularly

for sauces, browning and grilling, heating dishes or keeping them warm. Switch the burner on 15/20 minutes before

use to allow the cast iron plate to accumulate heat. You will then be able to use the plate even when switched off for

a further 10/15 minutes. The middle of the plate is the area where the highest temperatures are reached whereas the

outer part is cooler. By simply moving the pan from the middle to the outside of the plate, you can obtain different

cooking intensities without regulating the ﬂ ame. Pan dimensions permitting, several dishes can be cooked at the

same time (Fig. 33). If necessary it can be used as a handy top, providing ample space for resting pots and pans.

CLEANING THE COUP FEU PLATE

The hotplate should be cleaned while still warm using the products normally used in the kitchen for metal surfaces.

Rub with a wire pad, following the direction of the satin ﬁ nish. Dry well immediately. If you want to give the plate a

better appearance, after cleaning, apply a coat of Supercromo paste. If you do not intend to use the hotplate for

long periods, after normal cleaning apply a thin ﬁ lm of liquid parafﬁ n (Vaseline oil) with a wad of cotton wool This

treatment is necessary to prevent any formation of surface oxides. When next turning on the plate you will notice the

evaporation of the parafﬁ n oil used. This phenomenon will disappear in a few seconds. The hotplate may sometimes

present phenomena of surface oxidation due to the presence of humidity, but above all due to lack of use. You

are therefore advised to use it frequently to prevent any oxidation. Never leave the hotplate damp. If the oxidation

phenomenon still appears, use lightly abrasive paper to remove the oxidation, taking care to rub gently, always in

the direction of the plate satin ﬁ nish. Do not cook food directly on the plate surface. Always use suitable containers.

Figure 30

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ilve UP60 in the language / languages: English as an attachment in your email.

The manual is 2,96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ilve UP60 Manual

Product: