647452
19
Zoom out
Zoom in
Previous page
1/48
Next page
19
8. SEMI-AUTOMATIC FUNCTION WITH END OF COOKING TIME
Choose the function end of cooking (
button) and set the nal time with the +/- buttons. The symbols “A”
and the pot symbol appear. The oven is switched on. When the time coincides with the set time the oven is
switched off and the pot symbol disappears. The buzzer then sounds. The symbol “A” starts to ash.
9. AUTOMATIC FUNCTION WITH COOKING TIME AND END OF COOKING
Choose the function cooking time and set the required time with the +/- buttons. The symbol “A” appears.
The oven is switched on and the pot symbol appear. Wait a few seconds until the current time appears.
Set the end time using the end of cooking button
, the approximate nal time appears on the display.
Use the +/- buttons to set the nal time actually required. The oven is switched off and the pot symbol
disappear. The pot symbol will appear again when the time coincides with the nal time minus the cooking time.
At the end of the automatic programme the symbol “A” starts to ash. The buzzer sounds and the oven and pot
symbol disappear.
10. MINUTE MINDER
Choose the timer function (
button) and set the required time with the +/- buttons. The bell symbol will
remain on for the duration of time set. At the end of this time the buzzer sounds.
11. BUZZER
The buzzer sounds at the end of the cooking time function and continues to buzz for 7 minutes. The buzzer is
silenced by pressing any of the buttons or .
The volume of the buzzer can be adjusted using the “-“ button without having rst selected any function.
There are three different buzz volumes to choose from and their duration depends upon the length of time for
which the “-“ button is held pressed.
12. START OF A PROGRAMME AND CHECKING
Once a programme has been selected it starts after setting the time. The time remaining can be viewed at any
time by selecting the corresponding function again.
13. IDENTIFYING A PROGRAMMING ERROR
There is a programming error if the time indicated on the clock is between the cooking and end of cooking times.
The error is indicated by the buzzer sounding and the symbol “A” ashing.
14. CANCELLING A PROGRAMME
To cancel a programme select the manual function. At the end of the set programme this is automatically cancelled.
15. IMMEDIATE USE
A) If the display ashes read point B, otherwise go to point C.
B) If the display ashes the correct time has not been set or there has been a power failure. In this case, set the
correct time (see paragraph 5) and then go to point C.
C) Press the and button simultaneously. Set the temperature (thermostat knob) and function (selector
knob) using the knobs on the appliance.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ilve UP60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ilve UP60 in the language / languages: English as an attachment in your email.

The manual is 2,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info