647466
10
Zoom out
Zoom in
Previous page
1/48
Next page
10
ADAPTATION OF THE PRESSURE REGULATOR FOR
USE WITH DIFFERENT TYPE OF GAS
The pressure regulator supplied with the appliance is a convertible type pressure regulator for
use with Natural Gas at a nominal outlet pressure of 5”w.c. or LP gas at a nominal outlet pressure
of 10”w.c. and it is pre-arranged from the factory to operate with one of these gas/pressure as
indicated in the pre-arranging labels affixed on the appliance, package and Instruction booklet.
If Natural gas is converted to LP gas, also by-pass orifice has to be change.
The regulating crew of by-pass orifice must be fully screwed in.
To convert the regulator (Fig.6 and Fig.7) for use with the other gas different from which one it is
pre-arranged it is enough perform the following operations:
1. Unscrew by hand the upper metal stopper of the regulator.
2. Unscrew by hand the white plastic piece screwed under the above mentioned metal stopper, afterward screw
it again in opposite way under the metal stopper(for gas reference see the written “LP” and “NAT” with relative
indicating arrows on the white piece).
3. Screw again by hand the metal stopper in the original position on the regulator.
Operating in this way the gas regulator is converted for use with the other gas/pressure
Figure 6 Figure 7
Pressure regulator Pressure regulator; pressure
test-point stopper is pointed out
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ilve UM120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ilve UM120 in the language / languages: English as an attachment in your email.

The manual is 2,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info