647446
24
Zoom out
Zoom in
Previous page
1/66
Next page
Use of the Coup Feu
The large “Coup feu” solid cast iron plate made of concentric rings allows you to rest the pan
(or even several pans) directly on the surface (fig. B, C). it is heated by means of a gas burner (fig. A).
The plate is designed to provide a moderately intense heat which is well distributed over the surface.
This is ideal for slow cooking and particularly for sauces, browning and grilling, heating dishes or
keeping them warm. Switch the burner on 15/20 minutes before use to allow the cast iron plate
to accumulate heat. You will then be able to use the plate even when switched off for a further 10/15
minutes. The middle of the plate is the area where the highest temperatures are reached whereas the
outer part is cooler. By simply moving the pan from the middle to the outside of the plate, you can obtain
different cooking intensities without regulating the flame. Pan dimensions permitting, several dishes can be
cooked at the same time (fig. C). if necessary it can be used as a handy top, providing ample space for
resting pots and pans.
Cleaning the Coup Feu
The hotplate should be cleaned while still warm using the products normally used in the kitchen for metal
surfaces. Rub with a wire pad, following the direction of the satin finish. Dry well immediately. If you want
to give the plate a better appearance, after cleaning, apply a coat of Supercromo paste.
If you do not intend to use the hotplate for long periods, after normal cleaning apply a thin film of liquid
paraffin (Vaseline oil) with a wad of cotton wool. This treatment is necessary to prevent any formation of
surface oxides. When next turning on the plate you will notice the evaporation of the paraffin oil used. This
phenomenon will disappear in a few seconds. The hotplate may sometimes present surface oxidation due
to the presence of humidity, but above all due to lack of use. You are therefore advised to use it frequently
to prevent any oxidation. Never leave the hotplate damp. If the oxidation phenomenon still appears, use
lightly abrasive paper to remove it, taking care to rub gently, always in the direction of the plate satin finish.
Do not cook food directly on the plate surface. Always use suitable containers / cooking equipment.
simmer plate (coup feu)
freestanding cookers
24 ILVE Freestanding Operating Manual
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ilve PD90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ilve PD90 in the language / languages: English as an attachment in your email.

The manual is 3,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info