647423
64
Zoom out
Zoom in
Previous page
1/66
Next page
PROBLEM ANSWER
COOKTOPS
My burners will not ignite
• Check to see if the brass burners are placed correctly into the aluminium base. This is very
important as it will ensure the flame holes line up with the ignition post and spark. It will also
ensure correct combustion when alight.
• Does your ILVE cooktop have flame failure devices fitted? Ensure burners are located correctly
as above. When burner is lit, ensure knob is firmly depressed for 5 to 10 seconds.
Does your ILVE cooktop have
flame failure devices fitted?
Ensure burners are located correctly as above. When burner is lit, ensure knob is firmly depressed
for 5 to 10 seconds. If new, ensure knobs are firmly fitted, check by pushing knobs down firmly
with the palm of your hand.
My ignition continually sparks
This may be due to a liquid spill over, which can cause moisture to enter into ignition micro
switches under knobs. Spraying liquid type cleaners can also create a problem. If this does
occur, the cooktop should be turned off at power point and left to dry out. Removing all knobs
and using a hair dryer on the control panel, will assist the drying out process.
All the igniters spark at the same
time when lighting
This is normal and how they are designed to operate.
The knob is loose on shaft
Knob retaining spring clip has come out. This does not require a service technician and can be
replaced by the customer. Please contact your ILVE state office, who will arrange for a clip to be
sent to you.
The burner is extinguished when
the cupboards or drawers are
opened or shut
In this case, the underside of the cooktop needs to be totally sealed off from the surrounding
cupboards or drawers.
The flame tips are yellow causing
the pots to blacken on the
underside
The gas type may be incorrect contact your installer and have him check the gas type and the
injector size and or the aeration needs adjusting see pages 40-41
The low flame is still to high The low flame bypass screw needs to be adjusted contact your installer and have him adjust the
low flame setting as per the specification on page 41.
TROUBLESHOOTING
freestanding cookers
64 ILVE Operating Manual
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ilve MC-90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ilve MC-90 in the language / languages: English as an attachment in your email.

The manual is 3,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info