Manual Ilve HVI90TC (page 24 of 40) (English, French, Spanish)

509810

Zoom out

Zoom in

1/40

INSTALLATION INSTRUCTIONS

The installation comes under the exclusive responsibility of specialists.

The installer is held to respect the legislation and the standards enforce in his home country.

How to stick the gasket:

The gasket supplied with the hob avoids all infiltration of liquids in the cabinet.

His installation has to be done carelessly, in conformity of the following drawing.

Fitting - installing:

 The cut out sizes are:

HVI90TC 830 x 490 mm

 The piece of furniture or the support in which the hob is to be fitted, as well as the

edges of furniture, the laminate coatings and the glue used to fix them, must be able to

resist temperatures of up to 100 °C.

 The mural rods of edge must be heat-resisting.

 The hobs are classified as “Y” class for heat protection. Ideally the hob should be

installed with plenty of space on either side. There may be a wall at the rear and tall

units or a wall at one side. On the other side, however, no unit or divider must stand

higher than the hob.

 Ensure that there is a distance of 50 mm between the hob and the wall or sides.

 Materials which are often used to make worktops expand on contact with water. To

protect the cut out edge, apply a coat of varnish or special sealant. Particular care must

be given to applying the adhesive joint supplied with the hob to prevent any leakage

into the supporting furniture. This gasket guaranties a correct seal when used in

conjunction with smooth work top surfaces.

 Not to install the hob to the top of a not ventilated oven or a dishwasher.

 To guarantee under the bottom of the hob casing a space of 20 mm to ensure a good

air circulation of the electronic device.

 To guarantee between the work top and the top of the drawer or oven a space of 5 mm

to allow the exit of the air flow.

 If a drawer is placed under the work, avoid to put into this drawer flammable objects

(for example : sprays) or not heat-resistant objects.

 The safety gap between the hob and the cooker hood placed above must respect the

indications of the hood manufacturer. In case of absence of instructions respect a

distance minimum of 760 mm.

 The connection cord should be subjected, after builting, with no mechanical constraint,

such for example of the fact of the drawer.

 The installation of the hob in non stationary sites ( for example : boat ) should be

undertaken by specialists.

Stick the gasket (2) two millimeters

from the external edge of the glass,

after removing the protection sheet (3).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ilve HVI90TC in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ilve HVI90TC Manual

Product: