509810
18
Zoom out
Zoom in
Previous page
1/40
Next page
18
Ventilation
The cooling system is fully automatic. The cooling fan starts with a low speed when the
calories brought out by the electronic system reach a certain level. The ventilation starts his
high speed when the hob is intensively used. The cooling fan reduces his speed and stops
automatically when the electronic circuit is cooled enough.
STARTING-UP AND APPLIANCE MANAGEMENT
Before the first use
Clean your hob with a damp cloth, and then dry the surface thoroughly. Do not use detergent
which risks causing blue-tinted colour on the glass surface.
Induction principle
An induction coil is located under each heating zone. When it is engaged, it produces a
variable electromagnetic field which produces inductive currents in the ferromagnetic bottom
plate of the pan. The result is a heating-up of the pan located on the heating zone.
Of course the pan has to be adapted:
All ferromagnetics pans are recommended (please verify it thanks a little magnet): cast
iron and steel pans, enamelled pans, stainless-steel pans with ferromagnetic
bottoms…
Are excluded : cupper, pure stainless-steel, aluminium, glass, wood, ceramic,
stoneware,…
The induction heating zone adapts automatically the size of the pan. With a too small
diameter the pans doesn’t work. This diameter is varying in function of the heating zone
diameter.If the pan is not adapted to the induction hob the display will show [ U ].
Starting-up
Start-up/ switch off the hob
Action Control panel Display
To start: touch the key [ 0/I ] [ 0 ]
To stop: touch the key [ 0/I ] nothing or [ H ]
Start-up/ switch off a heating zone
Action Control panel Display
Increase power touch key [ + ] [ 4 ] to [ 9 ]
Decrease power touch key [ - ] [ 9 ] to [ 1 ]
Stop touch simultaneous [ + ] and [ - ] [ 0 ] or [ H ]
Pan detection
The pan detection ensures a perfect safety. The induction doesnt work :
If there is no pan on the heating zone or if this pan is not adapted to the induction. In
this case it is impossible to increase the power and the display shows [ U ]. This
symbol disappears when a pan is put on the heating zone.
If the pan is removed from the heating zone the operation is stopped. The display
shows [ U ]. The symbol [ U ] disappears when the pan is put back to the heating zone.
The cooking continues with the power level setted before.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ilve HVI90TC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ilve HVI90TC in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info