647470
22
Zoom out
Zoom in
Previous page
1/40
Next page
The cooking hob is supplied as a natural gas unit and should not require any adjustment of the aeration. If
the appliance is ordered and specified as a ULPG gas then it will be converted by Eurolinx prior to
dispatch and should not require any adjustment to the aeration. Follow the steps below to convert to LPG
and to adjust the aeration of the burners. Remove the pan supports, caps and burners from the hob.
Remove the screws from under each burner that are securing the hob to the base and lift top up to gain
access to the burner venturie.
Note: Some models that do not have a one piece hob will have securing around the outside edge of the
spillage bowl that will also need to be removed to gain access to the underside of the cooking hob.
Remove screw “F” and remove air damper “R” Replace the Natural gas injector
that is located at entry point of the venturie “U” with the ULPG injector. Use the
chart below to identify the correct injector for each type of burner. Replace the
air damper “R” and refit screw “F” leave lose to allow adjustment of aeration.
adaptation to different types of gas
Built-in cooktops
22 ILVE Built-in Cooktop Operating & Installation Manual
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ilve H30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ilve H30 in the language / languages: English as an attachment in your email.

The manual is 1,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info