504435

Iluv iNT170 Manual

6
Zoom out
Zoom in
Previous page
1/19
Next page
GETTING STARTED
Screen Displays - continued
Dialogue screens: Dialogue screens are shown to allow the user to change settings. They vary in
complexity from simple Yes/No options up to the scrollable network password input screen.
· As with menus, the selected item is shown with a
white background.
· Dialogue screens mark the current setting with an asterisk (*).
· The Standby screen shows the time, date and any active
alarm times.
· As you cycle through the play modes using the MODE button,
the LCD screen will show a splash screen for each mode. After
one second, the unit enters the selected mode plays the last
station that was playing in that mode. If this is not possible,
the iNT170 will attempt to connect to the selected source by
scanning for stations, networks, or prompting for user input
as appropriate.
Daylight savings
Daylight savings
OK
OFF
*
04/07/2009
07:00AM 08:30AM
04:32PM
Internet
Radio
OPERATIONAL INSTRUCTIONS
1. Place iNT170 on a suitable shelf or table and plug it in to a power outlet.
2. Once plugged in, the unit will automatically turn on. You should see a welcome message ‘iLuv
Starting’ and a moving progress bar.
3. The rst time the unit is switched on, it shows the main menu. Press the SELECT button until FM
is highlighted on the menu.
4. Press the SELECT button again to conrm.
5. The FM Now playing screen displays, showing the lowest frequency (87.5 MHz). Press the
SELECT button. The frequency display will increase incrementally as the radio scans up. Once a
station is found, it will play, with the station name shown in the Now playing display.
General Setup
Manual Updating: Select “Set Time/Date”, the date and time are
displayed as MM-DD-YYYY and hh:mm AM/PM with the rst value,
MM active (ashing).
· Adjust each value (month, day, year, hour, minute) with the
, and SELECT buttons. As each value is adjusted, the next value
becomes active and ashes.
· When you select the nal value (minutes or AM/PM, depending on
whether the clock is set to 12 or 24 hour mode), the display
reverts to the now playing screen and shows the newly
updated time.
01
•
01
•
2009
00:00
Set Time/Date
The default language is English. To change this, press the MENU button > System settings >
Languages > then select your language.
· A list of supported languages will appear on the LCD screen. Scroll up or down to choose from
the list.
Setting the Language
The time and date can be updated manually or automatically. Setting manually is simpler, but the
time and date will be lost when power is o. Setting automatically is a little more complicated at
rst, but the time and date will be automatically synchronized with external clocks, so it should
only need to be done once. As a result, automatic update is generally more accurate.
To enter the Time settings menu, press the MENU button > System settings > Time/date >
Setting the Time and Date
iLuv | 9iNT170 | V10M10_IM_EN_101320088 | iLuv
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Iluv iNT170 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Iluv iNT170 in the language / languages: English as an attachment in your email.

The manual is 1,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info