504433

Iluv iMM9500 Manual

8
Zoom out
Zoom in
Previous page
1/18
Next page
iLuv | 14iMM9400/9500 | V10M10_IM_EN_0205201013 | iLuv
OPERATIONAL INSTRUCTIONS
Setting the Clock
OPERATIONAL INSTRUCTIONS
Setting the time using the Time Sync function
The easiest way to set the clock on the iMM9400/9500 is to synchronize it with the atomic clock
function on your iPhone or iPod. This unit is equipped with a Time Sync function which automatically
sets the time by synchronizing it with your iPhone or iPod, when it is placed in the dock.
· With the power turned ON and the power connected, the Time Sync function is automatically
enabled as indicated by “TIME SYNC” on the display.
· When your iPhone or iPod is placed in the dock, the unit will begin authentication.
· During authentication, the unit will update the time according to your iPhone or iPod.
To turn o the Time Sync Function, follow these instructions:
· Press TIME SYNC/TIME SET to turn OFF/ON the Time Sync function. If the Time Sync function is
turned o, the unit will not sync the time from your iPhone or iPod.
Notes: The unit takes about 2 minutes (max) to synchronize the time from iPhone or iPod while “TIME SYNC” ashes
on LCD. Time Sync is complete will when “TIME SYNC” shows steadily on the display.
When the Time Sync function is ON, the iMM9400/9500 will always synchronize the time when your iPhone or
iPod is docked. To disable this function, turn o the Time Sync function once the correct time has been set.
Setting the time manually
When you rst plug in the unit, the display shows:
Note: To set the clock to the current time, proceed as follows:
1. Press and hold TIME SYNC/TIME SET for three seconds. The hour ashes.
2. Enter the hour by pressing
or .
3. Conrm the entry by pressing SELECT. The minutes will ash.
4. Enter the minutes by pressing
or and conrm with SELECT.
The time will always show in the display while in any mode (Tuner, CD, iPod, SD Card, USB and AUX).
The time is also displayed when the unit is turned o.
Press TIME SYNC/TIME SET repeatedly, the display will show, “TIME SYNC ON” or “TIME SYNC OFF.”
Timer
Setting the timer
You can set automatic switch-on and switch-o times with the built-in timer. Before you do this, be
sure the clock is set correctly.
1. With the unit on, press DISPLAY until “TIMER ON” appears on the display.
2. Press TIME SYNC/TIME SET and the hour will begin to ash.
Use
or to set the hour of the desired switch-on time.
Press SELECT to conrm and go to minute setting.
3. To set the minutes, press
or to adjust.
Conrm by pressing SELECT.
4. Press DISPLAY to proceed to setting the switch-o time.
5. Set the switch-o time using the same procedure as
switch-on time setting.
6. Press DISPLAY, as necessary to check the current time,
Timer On, and Timer O.
7. Press and hold TIMER/MEMORY for three (3) seconds to
activate the timer.
When the unit is in Standby mode, the programmed length of time from the last operating mode (CD,
iPod, TUNER, SD, or USB), before it was last switched o remains in eect. Make sure the tuner is tuned
to a radio station, or is in CD, iPod, SD or USB operation, a CD, iPod, SD card or USB must be inserted.
Setting the sleep timer
When the unit is in operation it can be set to automatically switch-o 5 to 120 minutes later. Press
SLEEP, as necessary, until the desired delay time appears on the display. The sleep timer can be set for:
5, 10, 15, 20, 30, 60, 90, and 120 minute intervals. The unit automatically turns o after the entered
time has elapsed.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Iluv iMM9500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Iluv iMM9500 in the language / languages: English as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info