504420
12
Zoom out
Zoom in
Previous page
1/18
Next page
WEATHER BAND OPERATIONWEATHER BAND OPERATION
Selectable Alert Option
Testing the Alert
The receiver can be programmed to only sound the voice or siren alert for select weather
emergency messages. Those messages unimportant to you can be programmed to only display a
message, minimizing annoyance.
To program the emergency messages you want to silence, follow these steps:
a. Press
MENU to open menu options when unit is in standby mode.
b. Rotate the
SEARCH wheel until “6. DEFEAT SIREN” displays and press ENTER to conrm.
c. Using the
SEARCH wheel, scroll through the dierent alerts you want to silence.
d. Press
ENTER to select alert, rotate the SEARCH wheel to select "ENABLE" or "DISABLE".
e. Press
ENTER to conrm your selection and exit the programming option.
1. Press
SETUP and program the county code following above “Programming a Single S.A.M.E.
County code” and “Programming Multiple S.A.M.E county code” sections.
2. Set all 6 digits to “-- -- -- -- -- --“ (blank).
Deleting the County Code
1. To test the alert function to ensure it is working, press SETUP when unit is in standby mode.
2. Rotate the
SEARCH wheel until “4. SIREN TEST” is displayed on the screen.
3. Press
ENTER to sound the alert siren.
4. Rotate the
SEARCH wheel to sound the dierent siren: WARNING > WATCH > ADVISORY >
ALARM
5. Press
ENTER again to silence the alarm.
1. Press
SETUP to open menu options in unit standby mode.
2. Rotate the
SEARCH wheel until “7. ALERT MODE” is displayed on the screen.
3. Press
ENTER and “VOICE” will start blinking on the screen.
4. To choose the voice alert, press
ENTER.
5. Once “VOICE” is chosen, the alert will sound for eight (8) seconds followed by 2 to 5 minutes of
weather broadcast.
6. To choose a siren alert, rotate
SEARCH wheel until “SIREN blinks on the screen press ENTER to
save this setting.
7. Once “SIREN is chosen, alert tones will sound for 2 to 5 minutes or until
ALERT is pressed. While
alert tone is sounding, press the
WEATHER/HAZARD ON/OFF button to listen the voice broadcasting.
8. During a voice or siren alert, press ALERT on unit, or POWER
AL OFF on remote control to stop
the alert.
Choosing an Alert (Voice or Siren)
1. To turn the alert on and o, press and hold ALERT for ve (5) seconds in power o state until
“ALERT ON” blinks on the screen.
2. Rotate the
SEARCH wheel to switch between ALERT ON” and ALERT OFF”.
3. Press ENTER to save your selection.
Turning the Alert ON / OFF
1. To set the alert volume, press SETUP when unit is in standby mode.
2. Rotate the
SEARCH wheel until “5. SIREN LEVEL is displayed.
3. Press
ENTER and “HIGH, "MID" or “LOW” will start blinking.
4. Then rotate the
SEARCH wheel to choose “HIGH”, "MID" or “LOW” volume.
5. Press ENTER to save your setting.
Setting the Alert Volume
Reviewing Alerts
The iMM183 weather receiver can store 10 dierent alerts/events with overlapping eective time in
its memory. If the receiver receives a new alert while a previous alert is still in eect, it automatically
displays the new alert message. Rotate the SEARCH wheel to review the past alerts and press ENTER
to review the ending time of each alert. If an alert is expired, “EXPIRED” will display on screen after
pressing ENTER.
iLuv | 22iMM183 | V10M10_IM_EN_0909200921 | iLuv
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Iluv iMM183 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Iluv iMM183 in the language / languages: English as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info