504364
6
Zoom out
Zoom in
Previous page
1/21
Next page
GETTING STARTED
Location of Controls (Rear View of Main Unit)
29. AC
Plug the AC power cord into this socket before plugging it into the wall outlet.
Note: When the system is connected to AC power, parts of the unit may be in operation due to
its stand-by feature. In order to turn the system completely o, remove the AC power
cord from the AC outlet.
30. FM ANT.
FM antenna “pigtail” wire
31. SPEAKERS L
Terminals for the left channel speaker
32. SUBWOOFER Output Jack
Connect an external subwoofer speaker (included)
33. SPEAKERS R
Terminals for the right channel speaker
29
30
31
32
33
GETTING STARTED
You can achieve acceptable reception if you use the supplied FM pigtail antenna. If so, the antenna
should be elongated and not coiled or bunched up. If it hangs freely, it can be quite eective.
Antenna Connection
Insert LEFT speakers striped wire into LEFT channel’s speaker block (31) by pressing the RED lever
and inserting the striped wire into the open hole. Do the same with the LEFT speaker’s
non-striped wire and the BLACK lever. Repeat for the RIGHT channel SPEAKER block (33) and the
RIGHT speaker’s wire.
Speaker Connection
This unit includes a subwoofer output jack on the rear panel labeled “SUBWOOFER OUT”. You may
connect an external, powered subwoofer(included) using a single RCA-type cable as shown below.
Subwoofer Connection
Connect the power cable (included in the accessories) rst to the power socket (29) at the unit and
then insert the power plug into the wall outlet. When you disconnect the plug from a socket, do
not pull the cable, always pull the plug.
Note: As soon as the unit has been connected to AC power, parts of the unit are in operation, due
to the standby function. To switch o the unit completely, remove the plug from the AC outlet.
Once the unit is plugged in, its time display (3) starts ashing, refer to Setting the digital clock
on Page 18.
AC Power Connection
Cable (included)
Subwoofer
iLuv | 10i9300 | V10M10_IM_EN_111120089 | iLuv
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Iluv i9300D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Iluv i9300D in the language / languages: English as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info