504363
16
Zoom out
Zoom in
Previous page
1/21
Next page
OPERATIONAL INSTRUCTIONS
Installing the dock adapter
Before docking your iPod on i9300/i9300D, a dock adapter must be properly installed. Please make
sure you are using a correct dock adapter for your iPod and that it is properly inserted into the
universal wall of i9300/i9300D. Failure to do so may damage your iPod.
Playing the iPod
1. Insert the already playing iPod in the universal dock.
2. Press the iPod PLAY/PAUSE button. The display will
show “Detect iPod State” and an iPod” icon. At the same
time, i9300/i9300D will automatically turn on, and you will
hear the music playing from your iPod.
3. Press the iPod SKIP or button (51) or (39) to
select desired track.
Pause / stop
To briey interrupt playback, press the
iPod PLAY/PAUSE button (21)/(50). The display will
show PLAY/PAUSE SET for a second then back to
normal mode.
1.
Press iPod PLAY / PAUSE button again to restart play.
2. To end the iPod playback, select CD or TUNER mode,
or press the POWER button to o.
Charging your iPod
To charge your iPod, insert your iPod into the built-in universal dock. Ensure that i9300/i9300D is
connected to an outlet.
Basic Operation with iPod
Install iPod
CARE AND MAINTENANCE GUIDE
· Treat the disc carefully. Handle the disc only by its edges. Never allow your ngers to contact with
the shiny, unprinted side of the disc
· Do not attach adhesive tape, stickers etc., to the disc label
· Clean the disc periodically with soft, lint-free, dry cloth. Never use detergents or adhesive
cleaners to clean the disc. If necessary, use a CD cleaning kit
· If disc skips or gets stuck on a section of the disc, it is probably dirty or damaged (scratched)
· When cleaning the disc, wipe in straight lines from the centre of the disc to the edge of the disc.
Never wipe in circular motions.
· To remove a disc from its storage case, press down on the centre of the case and lift the disc outs,
holding it carefully by the edges
· Fingerprints and dust should be carefully wiped o the disc’s recorded surface with a soft cloth.
Unlike conventional records. compact disc have no groove to collect dust and microscopic debris,
so gently wiping with a soft cloth should remove most particles.
CLEANING THE UNIT
· To prevent re or shock hazard, disconnect your unit from the AC power source when cleaning
· The nish on the unit may be cleaned with a dust cloth and cared for as other furniture, Use
caution when cleaning and wiping the plastic parts
· If the cabinets become dusty wipe them with a soft dry dust cloth. Do not use any wax or polish
sprays on the cabinets
· If the front panel becomes dirty or smudged with ngerprints it may be cleaned with a soft cloth
slightly dampened with a mild soap and water solution. Never use abrasive cloths or polishes as
these will damage the nish of your unit
CAUTION never allow any water or other liquids to get inside the unit
while cleaning.
iLuv | 30i9300 | V10M10_IM_EN_1111200829 | iLuv
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Iluv i9300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Iluv i9300 in the language / languages: English as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info