504363

Iluv i9300 Manual

13
Zoom out
Zoom in
Previous page
1/21
Next page
OPERATIONAL INSTRUCTIONS
Compact Disc Operation - continued
3. Press REPEAT three times to have all the inserted CDs (up to 4)
played continuously.
Track selection
Press TUNING + SKIP/SEARCH and TUNING – SKIP/SEARCH to select the desired tracks.
The tracks can be selected directly by pressing the corresponding numerical buttons 1 - 0 / +10.
The selected number appears on the display. If the CD player is in stop mode, play starts automati-
cally when a track is selected using the numerical buttons.
Search operation
While the CD is in play mode you can scan tracks by holding down TUNING + SKIP/SEARCH
and TUNING - SKIP/SEARCH. The CD will continue to play until you nd the track you want.
When you release the button the unit will resume normal play mode.
Track intro-scan
1. Press INTRO while in stop mode to play the rst 10 seconds of each track on all inserted CDs.
2. Press INTRO again and the selected track will play.
Mute function
If the MUTE button is pressed, the audio output will be muted, and the “MUTE” indicator will be
displayed. To cancel “MUTE” press the MUTE button once more or press the VOLUME UP/DOWN
button.
Program memory
The built-in program memory lets you play up to 40 tracks
(from up to 4 CDs) in the order of your choice. A track can be stored
more than once within the program.
1. Load the CDs.
2. Press MEM./CLK ADJ. (22)/(53) in the stop mode to switch to
programming mode.
OPERATIONAL INSTRUCTIONS
Compact Disc Operation - continued
3. Select a CD by pressing the corresponding DISC 1 - 4 button.
4. Select the desired track using the numerical buttons 0 - 9 / +10 on
the remote control or by repeatedly pressing TUNING + SKIP/SEARCH
and TUNING + SKIP/SEARCH.
5. Press MEM./CLK ADJ. to save the track in the rst program location.
For example, if you selected CD 1, track number 14, it will appear in
Program position 1 as shown below.
6. For the next program position, reselect this or another CD and select a track.
7. Conrm the selection using the MEM./CLK ADJ. button.
8. To program other tracks in the memory, repeat steps 3 - 7.
9. To play the program, press PLAY/PAUSE. The program can be played back again as long as
MEMORY appears on the display.
To clear the programming and resume normal playback
The programming is erased by pressing STOP until the MEMORY display disappears, or by open-
ing the CD changer door. If the unit is switched o, the program is not erased.
Note:
1. RANDOM will not function in programmed play.
2. This unit counts all the folders on an MP3 disc, even if a folder doesn’t contain any MP3 le(s).
If you select a folder which doesn’t contain any MP3 le(s), the unit will automatically skip to the
next folder until it nds one containing an MP3 le(s).
iLuv | 24i9300 | V10M10_IM_EN_1111200823 | iLuv
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Iluv i9300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Iluv i9300 in the language / languages: English as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info