504363
10
Zoom out
Zoom in
Previous page
1/21
Next page
OPERATIONAL INSTRUCTIONS
Amplier and Radio Operation - continued
4. Press the MEM./CLK ADJ. button
again to store the station along
with its preset. Repeat as required.
Note: You can also directly select the desired program preset by pressing numeric buttons 0~9 /
+10 (35) on the remote control. Store any remaining stations by repeating the process.
Changing a program position
If a memory position needs to be replaced by a station other than the current one, the new station
can be programmed as described above, and this will automatically replace the original station.
OPERATIONAL INSTRUCTIONS
Digital Clock and Timer
Setting the digital clock
When you rst plug in the unit,
the display shows:
Note:
To set the clock to the current time,
proceed as follows:
1. Press MEM./CLK ADJ. and the hour
will begin to ash.
2. Enter the hour by pressing the
buttons TUNING + SKIP/SEARCH
or TUNING - SKIP/SEARCH.
3. Conrm the hour entry by pressing
MEM./CLK ADJ. The minutes will then
begin to ash.
4. Enter the minutes by pressing the buttons TUNING + SKIP/SEARCH or TUNING
– SKIP/SEARCH and conrm with MEM./CLK ADJ.
To switch to the clock display while in tuner and CD modes, press DISPLAY MODE. The time is
displayed for approximately 5 seconds. The time is also displayed when the unit is turned o.
Setting the timer
You can set automatic switch-on and switch-o times with the built-in timer. Before you do this, be
sure the clock is set correctly.
1. With the unit on, press DISPLAY MODE
(9)/(42), as required, until TIMER ON
appears in the display.
2. Press MEM./CLK ADJ. (22)/(53) and
the hour will begin to ash. Use the
TUNING + SKIP/SEARCH or
TUNING - SKIP/SEARCH to set
the hour of the desired switch-on time.
iLuv | 18i9300 | V10M10_IM_EN_1111200817 | iLuv
EU Only
EU Only
EU Only
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Iluv i9300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Iluv i9300 in the language / languages: English as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info