160711
10
Zoom out
Zoom in
Previous page
1/14
Next page
iLuv
TM
Mini Audio System V10M10_IM_EN_01302006
- 9 - www.i-Luv.com
GENERAL OPERATIONS
NOTE:
Before setting the timer, make sure the clock is correctly set.
SETTING THE SOUND SOURCE
Select TUNER or CD mode and select the desired sound source.
SEETING THE TIMER FOR TUNER
1. If you select BAND, press REW/DOWN or FF/UP to select a preset station.
2. The display will show the selected preset station and frequency.
3. Press
TIMER
to confirm your selection.
a. “H” icon and “ON” will appear on the display.
b. The hour digit segment will flash more than 2 seconds.
4. Press
(REW/DOWN) or (FF/UP) to set the hour.
5. Press TIMER again, and the Minutes Digit segment will flash on the display.
6. Press
(REW/DOWN) or (FF/UP) to set the minutes.
7. Press TIMER again to store the start time.
8. Repeat steps 6~8 to set the timer off.
a. The display will show the TUNER segment.
9. Press
TIMER
to store the sound source.
a. The volume level 15 will appear on the display.
10. Press
(REW/DOWN) or (FF/UP) to set the desired sound level.
11. Press TIMER again to store the timer setting.
SETTING THE TIME FOR THE CD
1. Insert a disc into the CD tray.
2. Press
TIMER.
3. Repeat steps 4-11 under ‘Setting the Timer for Tuner’
4. Press
(REW/DOWN) or (FF/UP) to set the sound source to CD.
a. The volume level 15 will appear on the display.
5. Press
(REW/DOWN) or (FF/UP) to set the desired sound level.
6. Press TIMER again to store the timer setting. CD will be played.
SETTING THE TIMER OFF
Press the TIMER. The “H” icon will disappear.
SETTING THE SLEEP FUNCTION
1. Press SLEEP, and “SLEEP” will appear on the display.
2. Keep pressing SLEEP to adjust the sleep time in the order of 90>80>70...10 minutes.
3. To cancel the Sleep mode, press SLEEP again.
SETTING THE PRESET EQUALIZER
Press PRESET EQ to select the digital sound performance in the order of PASS, CLASSIC, ROCK, POP,
JAZZ and PASS.
MUTING THE SOUND
Press MUTE to terminate the sound output. Press again to cancel this mode.
OPERATIONS (CLOCK & RADIO)
SETTINGS
1. Under the power standby mode, press and hold MEMORY on the main unit for 2 seconds to access
clock setting. The first second digit of the 24-hour clock will flash.
2. Press
(REW/DOWN) or (FF/UP) on the remote control to set the correct hours.
3. Press MEMORY to select the minutes setting, and the "00" will flash.
4. Press
(REW/DOWN) or (FF/UP) to set the correct minutes.
5. Press
MEMORY
once more to store and confirm in the memory.
TUNING RADIO FREQUENCY
1. Press POWER on the remote control to switch on the unit or remote.
2. Press FUNCTION on the remote control to select the tuner mode.
3. Select the radio band (AM/FM) by pressing BAND on the remote control.
4. Press
(REW/DOWN) or (FF/UP) for few seconds, and then release the button.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Iluv i7500blk at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Iluv i7500blk in the language / languages: English as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info