HD Radio Receiver with iPod Dock and Dual Alarm Clock V10M10_IM_EN_03032008
www.i-Luv.com- 16 -
OPERATIONAL INSTRUCTIONS
Setting the Clock
The Clock can only be set in POWER off mode.
1. Press and hold the SET/FM MODE button for 2 seconds and the Hour digits of the clock will flash.
2. Press the I__ or`` I buttons or TUNINGTS buttons until the correct Hour digits appear in the LCD.
Note: Make sure the hour is set so that AM or PM is correctly displayed. It is important that the "AM" or "PM" setting is correct for proper operation of the
Alarm function.
3. Press the SET/FM MODE Button to confirm. Minute digits will appear and flash in the LCD.
4. Press the I__ or `` I buttons on the remote control or TUNINGTS buttons on the unit to set the Minute digits.
5. Press the SET/FM MODE button to exit and activate the new clock time to operate.
Setting the Alarm
This Radio allows you to set two different wake-up times which can be used independently or simultaneously AL1 or AL2 or AL1 and AL2.
The procedure for setting the alarm time for ALARM 1 and ALARM 2 is the same.
To set ALARM 1 alarm, follow these instructions:
1. In POWER off mode, press the ALARM 1 Button briefly. The ALARM 1 Alarm Indicator
appears.
2. Press and hold the ALARM 1 Button until the wakeup sound source appears and flashes in the display.
3. Press the``I /T or I__ /S Buttons repeatedly to select the Alarm1 wakeup mode (Radio, iPod or Buzzer).
4. Press the ALARM1 Button to confirm when the desired wakeup mode appears in the Display.
The Display will then show the flashing Hour digits prompting for input.
5. Press the ``I /T or I__ /S Buttons to select the desired wakeup Hour.
Note: Make sure the hour is set so that AM or PM is correctly displayed. It is important that the "AM" or "PM" setting is correct for proper operation of the
Alarm function.
6. Press the ALARM 1 Button again to confirm the wakeup Hour. Minute digits will appear and flash in the Display.
7. Press the `` I /T or I__ /S Buttons to select the desired Minutes.
8. Press the ALARM 1 Button again to confirm the Minutes. The Alarm sound level will then be displayed and flash to prompt for input.
9. Press the VOLUME + or – Buttons to select the desired wakeup sound level.
10. Press the ALARM 1 Button to confirm and the alarm setting process is then completed.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Iluv i169 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Iluv i169 in the language / languages: English as an attachment in your email.
The manual is 0,75 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
