Stereo Audio System for Your iPod V11M11_IM_EN_10172007
www.i-Luv.com- 15 -
OPERATIONAL INSTRUCTIONS
AUX In-continued
1. Press the POWER/FUNCTION button on the top panel or remote control to select AUX function. “AUX” will show on the top of the display
2. Turn your auxiliary source ON and operate it as usual. The sound from the auxiliary source will be heard through the speakers of the i166.
3. Adjust the VOLUME level controls of this unit and the auxiliary sound source as desired.
Note: Connection cables are not included with this unit.
Subwoofer Out
Connect the Audio Output jacks of your active subwoofer to the SUBWOOFER OUT jack on the back panel of the unit. Then the unit will become a 2.1
system and the bass would be able to sound from the external active subwoofer.
Note: The connection cables and active subwoofer are not included.
Adjusting the Brightness of the LCD Screen
During STANDBY mode, press the SNOOZE button on top panel or remote control to adjust the brightness of the display. It will return to normal after eight
(8) seconds. During playback function, Press the SNOOZE button to interchange the dimmer and brightness display.
Resetting the Unit
If the system does not respond, there may have been a power surge that triggered the internal computer to shut down automatically. If this occurs,
disconnect the main power and connect it again after approximately one minute.
Note: Although the power disconnection will unlock the internal computer after a power surge, it will also erase all of the settings. After turning the unit ON, it
may be necessary to reset.
Back Up Function
If the AC supply is interrupted, the clock display and preset radio stations will go off and all settings will be canceled. To back up the
clock and preset stations, insert two “AA” size batteries (not supplied) in the battery compartment in the base of the unit. The
batteries will not save alarm clock settings. The back up battery does not provide operation of your iPod.
Note: Always use Alkaline batteries and remove the batteries when the unit is not to be used for an extended period of time.
Maintenance
•Place the unit on a level surface away from sources of direct sunlight or excessive heat.
•Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material should be
placed between it and the furniture.
•Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as Benzine, thinner
or similar materials can damage the surface of the unit.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Iluv i166 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Iluv i166 in the language / languages: English as an attachment in your email.
The manual is 0,97 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
