749809
11
Zoom out
Zoom in
Previous page
1/46
Next page
ENGLISH
11
Display code Description Possible causes Solution
F0E2, F0E4, F0E6,
F0E8, F0EC, F1E1, F6E1,
F7E5, F7E6
Disconnect the hob from the power supply.
Wait a few seconds then reconnect the hob to the power supply.
If the problem persists, call the service centre and specify the error code that appears on the display.
e.g. The hob does not allow a special
function to be activated.
The power regulator limits the
power levels in accordance
with the maximum value set
for the hob.
See paragraph “Power
management”.
e.g.
Induction hobs may whistle or creak during normal operation.
These noises actually come from the cookware and are linked to the
characteristics of the pan bottoms (for example, when the bottoms are
made from dierent layers of material or are irregular).
These noises may vary according to the type of cookware used and to
the amount of food it contains and are not the symptom of something
wrong.
SOUNDS PRODUCED DURING OPERATION
TROUBLESHOOTING
• Check that the electricity supply has not been shut o.
• If you are unable to turn the hob o after using it, disconnect it from the
power supply.
• If alphanumeric codes appear on the display when the hob is switched on,
consult the following table for instructions.
Please note: The presence of water, liquid spilled from pots or any
objects resting on any of the hob buttons can accidentally activate or
deactivate the control panel lock function.
DISPLAY CODE DESCRIPTION POSSIBLE CAUSES SOLUTION
F0E1
Cookware is detected but it is not
compatible with requested operation.
The cookware is not well positioned on
the cooking zone, or it is not compatible
with one or more cooking zones.
Press On/O button twice to remove the
F0E1 code and restore the functionality
of the cooking zone. Then, try to use the
cookware with a dierent cooking zone, or
use dierent cookware.
F0E7
Wrong power cord connection. The power supply connection is not
exactly as indicated in “ELECTRICAL
CONNECTION
paragraph
.
Adjust the power supply connection
according to “ELECTRICAL CONNECTION“
paragraph
.
F0EA
The control panel switches o because
of excessively high temperatures.
The internal temperature of electronic
parts is too high.
Wait for the hob to cool down before using
it again.
F0E2, F0E4, F0E6,
F0E8, F0EC, F1E1,
F6E1, F7E5, F7E6
Disconnect the hob from the power supply.
Wait a few seconds then reconnect the hob to the power supply.
If the problem persists, call the service centre and specify the error code that appears on the display.
d E
[when the hob is off]
The hob does not switch heat up.
The functions do not come on.
DEMO MODE on.
Follow the instructions in the “DEMO
MODE paragraph.
e.g.
:
The hob does not allow a special
function to be activated.
The power regulator limits the power
levels in accordance with the maximum
value set for the hob.
See paragraph "Power management".
e.g.
[
Power level lower than
level requested
]
The hob automatically sets a minimum
power level to ensure that the cooking
zone can be used.
The power regulator limits the power
levels in accordance with the maximum
value set for the hob.
See paragraph "Power management".
AFTERSALES SERVICE
In order to receive a more complete assistance, please register your
product on www . indesit . com / register.
BEFORE CALLING THE AFTER-SALES SERVICE:
1. See if you can solve the problem by yourself with the help of the
suggestions given in the TROUBLESHOOTING.
2. Switch the appliance o and back on again to see if the fault persists.
IF AFTER THE ABOVE CHECKS THE FAULT STILL OCCURS, GET IN
TOUCH WITH THE NEAREST AFTER-SALES SERVICE.
To receive assistance, call the number shown on the warranty booklet or
follow the instructions on the website www . indesit . com .
When contacting our Client After sales service, always specify:
• a brief description of the fault;
• the type and exact model of the appliance;
XXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXX
Made in X
Type: XXXMod.: XXX01 XXXX XXX XXXXXXX XXXX XXXXX
XXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
• the service number (number after the word Service on the rating
plate). The service number is also indicated on the guarantee
booklet;
• your full address;
• your telephone number.
If any repairs are required, please contact an authorized after-sales
service (to guarantee that original spare parts will be used and repairs
carried out correctly).
In the case of ush-mounted installation, call the After Sales Service to
request assembly of screws kit 4801 211 00112.
400011415253
EN
[Power level lower
than level requested]
The hob automatically sets a
minimum power level to ensure
that the cooking zone can be
used.
The power regulator limits the
power levels in accordance
with the maximum value set
for the hob.
See paragraph “Power
management”.
Sounds produced during operation
Induction hobs may whistle or creak during normal operation.
These noises actually come from the cookware and are linked
to the characteristics of the pan bottoms (for example, when
the bottoms are made from dierent layers of material or are
irregular).
These noises may vary according to the type of cookware used
and to the amount of food it contains and are not the symptom
of something wrong.
Before calling the after-sales service:
1. If there is a fault try to resolve the problem by following
troubleshooting guidelines.
2. Switch the appliance o and back on again to see if the fault
persists.
If after the above checks the fault still occurs, get in touch
with the nearest after-sales service.
You can nd a full list of IKEA appointed contacts at the end of
this user manual.
When contacting our Client After sales service, always specify:
a brief description of the fault;
the type and exact model of the appliance;
the service number (number after the word Service on the
rating plate). The service number is also indicated on the
guarantee booklet;
your full address;
your telephone number.
If any repairs are required, please contact an authorized after-
sales service (to guarantee that original spare parts will be used
and repairs carried out correctly).
Model: TREVLIG 504.678.35
Type of hob Electric
Number of cooking zones 4
Heating technology Induction
Dimension of Heater (Ø or LxW) Left front 15,0 cm
Left rear 21,0 cm
Right rear 18,0 cm
Right front 18,0 cm
Energy consumption per cooking zone - (EC electric cooking) Left front 175,1 Wh/kg
Left rear 178,0 Wh/kg
Right rear 170,0 Wh/kg
Right front 171,4 Wh/kg
Energy consumption of the hob - (EC electric hob) 173,6 Wh/kg
This appliance meets the Eco design requirements of European Regulation n.66/2014, in conformity to the European Standard EN
60350-2
Technical data
SERVICE
PLER8
00
220-240 V ~ 50-60 Hz
7,2 kW
HB I84F
1806
F101090
HB I84F
869991010900
901806030988
I.C.SN
802080988
769991010902
The technical information are situated in the rating plate on the
bottom side of the appliance.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ikea Trevlig 504.678.35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ikea Trevlig 504.678.35 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 6,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ikea Trevlig 504.678.35

Ikea Trevlig 504.678.35 User Manual - Dutch, Portuguese, Spanish - 43 pages

Ikea Trevlig 504.678.35 Installation Guide - All languages - 120 pages

Ikea Trevlig 504.678.35 Installation Guide - All languages - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info