FRANÇAIS 41
Que faut-il fair
Votr
suivante. Pour toute autre err
coordonnées dans le livr
moins 10 ans après la date de pr
Problèmes... Causes possibles... Solutions...
What t o do if ... What t o do if ...
In case your dishwasher doesn’t work properly , check if the problem can be solved by going through the following list.
For other errors or issues please contact authorized After-sales Service which contact details can be found in the warranty
booklet. The manufacturer ensures the availability of spare parts for at least 10 years after production date of this appliance.
PROBLEMS POSSIBLE CAUSES SOLUTIONS
Salt indicator is lit
Salt reservoir is empty . (After refill
the salt indicator may remain lit
for several wash cycles).
Refill reservoir with sal (for more information - see page 8).
Adjust water hardness - see table, page 8 .
Rinse aid indicator is lit
Rinse aid dispenser is empty .
(After refill the rinse aid indicator
may remain lit for several wash
cycles).
Refill dispenser with rinse aid (for more information - see page 8) .
The dishwasher won’t start
or does not respond to
commands.
The appliance has not been
plugged in properly . Insert the plug into the socket.
Power outage. The dishwasher starts automatically when the power returns.
The dishwasher door is not closed. V igorously push the door until you hear the “click” .
It does not respond to commands.
Display shows: 9 or 12 and
On/Of f LED is blinking rapidly .
Switch of f the appliance by pressing the ON/OFF button, switch it
back on after approximately one minute and reset the program.
If problem persists, unplug the appliance for 1 minute, then plug it
back in.
The dishwasher won’t drain.
Display shows: 3 and
On/Of f LED is blinking
rapidly
The wash cycle has not finished yet W ait until the wash cycle finishes
The drain hose is bent. Check that the drain hose is not bent (see INST ALLA TION).
The sink drain pipe is blocked. Clean the sink drain pipe.
The filter is clogged up with food
residues. Clean the filter (see CLEANING THE FIL TER ASSEMBL Y).
The dishwasher makes
excessive noise.
The dishes are rattling against
each. Arrange the crockery correctly (see LOADING THE RACKS).
An excessive amount of foam has
been produced.
The detergent has not been measured out correctly or it is not
suitable for use in dishwashers (see FILLING THE DETERGENT
DISPENSER) . Reset the current cycle by switching OFF the
dishwasher , then switch it on again, select a new program, press
ST AR T/Pause and close the door within 4 seconds. Please do not
add any detergent.
The dishes are not clean.
The crockery has not been
arranged properly . Arrange the crockery correctly (see LOADING THE RACKS).
The spray arms cannot rotate freely ,
being hindered by the dishes. Arrange the crockery correctly (see LOADING THE RACKS).
The wash cycle is too gentle
and/or detergent efficiency is lo . Select an appropriate wash cycle (see PROGRAMS T ABLE).
An excessive amount of foam has
been produced.
The detergent has not been measured out correctly or it is not suitable
for use in dishwashers ( see FILLING THE DETERGENT DISPENSER) .
The cap on the rinse aid compart -
ment has not been shut correctly . Make sure the cap of the rinse aid dispenser is closed.
The filter is soiled or clogged Clean the filter assembly (see CARE AND MAINTENANCE).
There is no salt. Fill the salt reservoir (see FILLING THE SAL T RESER VOIR).
The dishwasher does not fill
the water .
Display shows: H
6
and On/Of f LED is blin-
king
rapidly
No water in the water supply or
the tap is closed. Make sure there is water in the water supply or the tap running.
The inlet hose is bent. Make sure the inlet hose is not bent (see INST ALLA TION) repro-
gram the dishwasher and reboot.
The sieve in the water inlet hose
is clogged; it is necessary to
clean it.
After having carried out the verification and cleaning, turn o f and
turn on the dishwasher and restart a new program.
Le voyant de niveau de
sel est allumé
Le réservoir à sel est vide. (Apr
le remplissage, il est possible
que le voyant du niveau de sel
régénér
de plusieurs cycles de lavage).
Remplissez le réservoir de sel r
d'informations, reportez-vous à la page8).
Réglez la dureté de l'
page8.
What t o do if ... What t o do if ...
In case your dishwasher doesn’t work properly , check if the problem can be solved by going through the following list.
For other errors or issues please contact authorized After-sales Service which contact details can be found in the warranty
booklet. The manufacturer ensures the availability of spare parts for at least 10 years after production date of this appliance.
PROBLEMS POSSIBLE CAUSES SOLUTIONS
Salt indicator is lit
Salt reservoir is empty . (After refill
the salt indicator may remain lit
for several wash cycles).
Refill reservoir with sal (for more information - see page 8).
Adjust water hardness - see table, page 8 .
Rinse aid indicator is lit
Rinse aid dispenser is empty .
(After refill the rinse aid indicator
may remain lit for several wash
cycles).
Refill dispenser with rinse aid (for more information - see page 8) .
The dishwasher won’t start
or does not respond to
commands.
The appliance has not been
plugged in properly . Insert the plug into the socket.
Power outage. The dishwasher starts automatically when the power returns.
The dishwasher door is not closed. V igorously push the door until you hear the “click” .
It does not respond to commands.
Display shows: 9 or 12 and
On/Of f LED is blinking rapidly .
Switch of f the appliance by pressing the ON/OFF button, switch it
back on after approximately one minute and reset the program.
If problem persists, unplug the appliance for 1 minute, then plug it
back in.
The dishwasher won’t drain.
Display shows: 3 and
On/Of f LED is blinking
rapidly
The wash cycle has not finished yet W ait until the wash cycle finishes
The drain hose is bent. Check that the drain hose is not bent (see INST ALLA TION).
The sink drain pipe is blocked. Clean the sink drain pipe.
The filter is clogged up with food
residues. Clean the filter (see CLEANING THE FIL TER ASSEMBL Y).
The dishwasher makes
excessive noise.
The dishes are rattling against
each. Arrange the crockery correctly (see LOADING THE RACKS).
An excessive amount of foam has
been produced.
The detergent has not been measured out correctly or it is not
suitable for use in dishwashers (see FILLING THE DETERGENT
DISPENSER) . Reset the current cycle by switching OFF the
dishwasher , then switch it on again, select a new program, press
ST AR T/Pause and close the door within 4 seconds. Please do not
add any detergent.
The dishes are not clean.
The crockery has not been
arranged properly . Arrange the crockery correctly (see LOADING THE RACKS).
The spray arms cannot rotate freely ,
being hindered by the dishes. Arrange the crockery correctly (see LOADING THE RACKS).
The wash cycle is too gentle
and/or detergent efficiency is lo . Select an appropriate wash cycle (see PROGRAMS T ABLE).
An excessive amount of foam has
been produced.
The detergent has not been measured out correctly or it is not suitable
for use in dishwashers ( see FILLING THE DETERGENT DISPENSER) .
The cap on the rinse aid compart -
ment has not been shut correctly . Make sure the cap of the rinse aid dispenser is closed.
The filter is soiled or clogged Clean the filter assembly (see CARE AND MAINTENANCE).
There is no salt. Fill the salt reservoir (see FILLING THE SAL T RESER VOIR).
The dishwasher does not fill
the water .
Display shows: H
6
and On/Of f LED is blin-
king
rapidly
No water in the water supply or
the tap is closed. Make sure there is water in the water supply or the tap running.
The inlet hose is bent. Make sure the inlet hose is not bent (see INST ALLA TION) repro-
gram the dishwasher and reboot.
The sieve in the water inlet hose
is clogged; it is necessary to
clean it.
After having carried out the verification and cleaning, turn o f and
turn on the dishwasher and restart a new program.
le voyant du niveau de
liquide de rinçage est
allumé
Le distributeur de liquide de
rinçage est vide. (Après le
remplissage, il est possible que
le voyant du niveau de liquide de
rinçage ne s'
de plusieurs cycles de lavage).
Remplissez le distributeur de liquide de rinçage (pour plus
d'informations, reportez-vous à la page 8).
Le lave-vaisselle ou les
commandes ne fonctionnent
pas.
L
branché. Insér
Panne de courant. Pour des raisons de sécurité, le lave-vaisselle ne redémarr
pas automatiquement lors du rétablissement du cour
Ouvrez la porte du lave-vaisselle, appuye
et fermez la porte dans les 4 secondes.
La porte du lave-vaisselle n'
pas fermée.
La broche Natur
entrée.
Poussez vigoureusement la porte pour entendr
Les commandes ne fonctionnent
pas. L
12 et le voyant MARCHE/ARRÊT
clignote rapidement.
Éteindre l'
ARRÊT
le progr
pendant 1 minute, puis rebr
Le lave-vaisselle ne se
vidange pas.
L
voyant Mar
rapidement
Le cycle de lavage n'
encore terminé Attendre que le cycle se termine
Le tuyau de vidange est plié.
Assurez-vous que le tuyau de vidange n
INST
Le conduit de vidange de l'
est bouché. Nettoyez le conduit de vidange de l'
Le ltre est bouché par des
résidus de nourritur Nettoyez le ltr
Le lave-vaisselle fait
beaucoup de bruit.
La vaisselle s' Replace
Il y a une trop gr
de mousse. Le détergent a été mal mesuré ou il n
pour les lave-vaisselles (voir REMPLIR LE DISTRIBUTEUR
DE DÉTERGENT). Relancez le cycle en cours en éteignant le
lave-vaisselle, puis en le rallumant, sélectionnez un nouveau
progr
dans les 4 secondes. Merci de ne pas ajouter de détergent.
La vaisselle n'
La vaisselle n'
placée. Replacez la vaisselle (voir CHARGEMENT DES P
Les gicleurs ne bougent pas
librement, ils sont gênés par la
vaisselle.
Replacez la vaisselle (voir CHARGEMENT DES P
Le cycle de lavage est trop
délicat et/ou l'
détergent est faible.
Sélectionnez le cycle de lavage approprié (voir T
PROGRAMMES).
Il y a une trop gr
de mousse. Le détergent a été mal mesuré ou il n
lave-vaisselles (voir REMPLIR LE DISTRIBUTEUR DE DÉTERGENT).
Le bouchon du compartiment de
liquide de rinçage n'
fermé.
Assurez-vous que le bouchon du distributeur de liquide de
rinçage est fermé.
Le ltre est sale ou bouché Nettoyez l'
Il n'y a pas de sel.
Remplir le réservoir de sel (voir REMPLIR LE RÉSERVOIR DE SEL).
