Manual Ikea OTROLIG (page 8 of 80) (English, German, French, Italian)

611784

Zoom out

Zoom in

1/80

ENGLISH 8

Select the cooking zone to be used with the

timer (an illuminated dot appears to the

bottom right hand side of the heat setting

indicator on the display), press the button +

or - button

with the clock symbol then set

the desired cooking time using the buttons

“+” and “-” of the timer function (see gure).

After 3 seconds, the timer begins the

countdown (an illuminated dot is visible next

to the zone for which the timer has been

activated).

Once the set time has elapsed, an acoustic

signal sounds and the cooking zone switches

off automatically.

To deactivate the timer, press the “-” button

until the display shows “0:0” or hold the + or

- button

for at least 3 seconds.

To set the timer for another zone, repeat

the points above. The timer display always

shows the timer for the selected zone or the

shortest timer.

To change or switch off the timer, press

the zone selection button for the timer in

question.

Pause

This function allows you to temporarily

hold and then resume cooking processes

maintaining previous settings). Press the key

ashes on the display in place of

the power levels. To resume cooking, press

the key

and touch the slider of an

active zone again.

Activation/deactivation of the acoustic

signal

Keep the

(Acoustic signal) button for at

least 3 seconds. To deactivate the function

repeat the same procedure.

Deactivation of cooking zones

Select the cooking zone you wish to switch

off. Press the “0” on the slider area to set the

level to “0”.

The cooking zone switches off and the

residual heat indicator “H” lights up.

Flexi mode

This function allows the cooking zone to be

used as two separate zones or as a single

extra large zone.

It is perfect for oval, rectangular and

elongated pans (with maximum base

dimensions of 38x23 cm) or more than one

standard pan in the same time. In order to

activate the exi mode function, switch on

the hob, press

(Flexi mode) button: the

two cooking zone displays show level “0”;

both dots next to the level number are lit,

indicating that the Flexi mode is activated.

To change the power level (from 1 to max.

9 or P) press one of the two slider related

to Flexi mode zone. To deactivate the Flexi

mode function, press

(Flexi mode) button.

The message “no pot”

will appear

on the display of the zone that is not able to

detect any pot (because of missing pot, or

misplaced or not suitable for induction hob).

This message remains active for 60 seconds:

in this time you can add or slide pots within

the exi mode area as you prefer.

After 60 seconds if no pan is placed on the

zone, the system stops “searching” pots on

that zone, the symbol remains visible

on the display to remind that the zone is

disabled.

To reactivate the Flexi mode function, press

(Flexi mode) button.

The Flexi mode function is also able to

detect when a pot is moved from one zone

to the other one within the exi mode area

keeping the same power level of the zone

where the pan originally was placed (see

the example in the gure below: if the pot

is moved from the front heater to the rear

heater, the power level will be shown on the

display corresponding to the zone where the

pot is placed).

It is also possible to operate the Flexi mode

area as two independent cooking zones,

using the corresponding button of the single

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ikea OTROLIG in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ikea OTROLIG

Ikea OTROLIG User Manual - Dutch, Portuguese, Spanish - 66 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ikea OTROLIG Manual

Product: