468497
8
Zoom out
Zoom in
Previous page
1/22
Next page
ENGLISH 8
Startprotection/keylock
This automatic safety function is activated
one minute after the oven has returned to
“stand by mode“. (The oven is in “stand by”
when the 24-hour clock is displayed or if the
clock has not been set, when the display is
blank).
The door must be opened and closed e.g.
putting food into it, before the safety lock is
released. Else the display will show “DOOR”.
Coolingdown
When a function is nished, the oven may
carry out a cooling procedure. This is
normal.
After this procedure the oven switches off
automatically.
The cooling procedure can be interrupted
without any harm to the oven by opening
the door.
Kitchentimer
Use this function when you need a kitchen
timer to measure exact time for various
purposes such as cooking eggs or letting the
dough rise before baking etc.
312
1. Press the +/- buttons to set the desired
length of the timer.
2. Press the Power button repeatedly to set
the power to 0 W.
3. Press the Start button.
An acoustic signal will be heard when the
timer has nished to count down.
Pressing the Stop button before the timer
has nished will reset the timer to zero.
Clock
Keep the door open while setting the Clock.
This gives you 10 minutes to complete the
setting of the Clock. Otherwise, each step
must be accomplished within 60 seconds.
3/52/41
1. Press the Stop button (3 seconds) until
the left-hand digit (hour’s) icker.
2. Press the +/- buttons to set the hours.
3. Press the Start button (The two right
hand digits (minutes) icker).
4. Press the +/- buttons to set the minutes.
5. Press the Start button again.
The clock is set and in operation.
NOTE: when the appliance is rst plugged
in or after a power failure, the display is
blank. If the clock is not set, the display will
remain blank until the cooking time is set.
Dailyuse
8


Need help? Post your question in this forum.

Forumrules
1

Forum

ikea-nutid-mw6

Reset search

  • The select button seems stuck and won't budge - oven hardly ever used ? any ideas Submitted on 20-2-2021 at 18:47

    Reply Report abuse
  • I want to replace my NUTID MWC6 combimagn hetel 60x46W by a new one.
    The new magnetron must be identical regarding dimensions.
    What possibilities can you offer? Submitted on 3-8-2020 at 17:55

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ikea Nutid MW6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ikea Nutid MW6 in the language / languages: English as an attachment in your email.

The manual is 2,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ikea Nutid MW6

Ikea Nutid MW6 User Manual - German - 84 pages

Ikea Nutid MW6 User Manual - Dutch - 12 pages

Ikea Nutid MW6 User Manual - Dutch - 22 pages

Ikea Nutid MW6 User Manual - French, Italian - 84 pages

Ikea Nutid MW6 Installation Guide - All languages - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info