483537
5
Zoom out
Zoom in
Previous page
1/68
Next page
If the refrigerant circuit should become
damaged:
avoid open flames and sources of igni-
tion
thoroughly ventilate the room in which
the appliance is situated
It is dangerous to alter the specifications
or modify this product in any way. Any
damage to the cord may cause a short-
circuit, fire and/or electric shock.
Warning! Any electrical component
(power cord, plug, compressor) must
be replaced by the After Sales Service
agent or qualified service personnel.
1. Power cord must not be lengthened.
2. Make sure that the power plug is not
squashed or damaged by the back
of the appliance. A squashed or
damaged power plug may overheat
and cause a fire.
3. Make sure that you can come to the
mains plug of the appliance.
4. Do not pull the mains cable.
5. If the power plug socket is loose, do
not insert the power plug. There is a
risk of electric shock or fire.
6. You must not operate the appliance
without the lamp cover
1)
of interior
lighting.
This appliance is heavy. Care should be
taken when moving it.
Do not remove nor touch items from the
freezer compartment if your hands are
damp/wet, as this could cause skin abra-
sions or frost/freezer burns.
Avoid prolonged exposure of the appli-
ance to direct sunlight.
Bulb lamps
2)
used in this appliance are
special purpose lamps selected for
household appliances use only. They are
not suitable for household room illumina-
tion.
Daily Use
Do not put hot pot on the plastic parts in
the appliance.
Do not store flammable gas and liquid in
the appliance, because they may ex-
plode.
Appliance's manufacturers storage rec-
ommendations should be strictly adhered
to.
Care and cleaning
Before maintenance, switch off the appli-
ance and disconnect the mains plug from
the mains socket.
Do not clean the appliance with metal
objects.
Regularly examine the drain in the refrig-
erator for defrosted water. If necessary,
clean the drain. If the drain is blocked,
water will collect in the bottom of the ap-
pliance.
Installation
Important! For electrical connection
carefully follow the instructions given in the
specific paragraph.
Unpack the appliance and check if there
are damages on it. Do not connect the
appliance if it is damaged. Report possi-
ble damages immediately to the After
Sales Service (refer to "Service"). In that
case retain packing.
It is advisable to wait at least four hours
before connecting the appliance to allow
the oil to flow back in the compressor.
Adequate air circulation should be
around the appliance, lacking this leads
to overheating. To achieve sufficient ven-
tilation follow the instructions relevant to
installation.
Wherever possible the back of the prod-
uct should be against a wall to avoid
touching or catching warm parts (com-
pressor, condenser) to prevent possible
burn.
The appliance must not be located close
to radiators or cookers.
Make sure that the mains plug is accessi-
ble after the installation of the appliance.
1) If the lamp cover is foreseen
2) If the lamp is foreseen
ENGLISH 5
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ikea FROSTIG SC136 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ikea FROSTIG SC136 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 3,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ikea FROSTIG SC136

Ikea FROSTIG SC136 Installation Guide - Dutch - 20 pages

Ikea FROSTIG SC136 User Manual - Dutch - 16 pages

Ikea FROSTIG SC136 User Manual - Portuguese, Spanish - 60 pages

Ikea FROSTIG SC136 Installation Guide - All languages - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info