ENGLISH 16
To ret the door
Insert the hinges in their seats.1.
Open the door fully.2.
Lower the two catches.3.
Close the door4.
Moving the top heating element (some
models only)
Remove the oven runners (Fig. 5).1.
Fig. 5
Pull the heating element out a little 2.
(Fig. 6) and lower it.
Fig. 6
To reposition the heating element, lift 3.
it up, pulling it slightly towards you,
making sure it comes to rest on the
lateral supports (Fig. 7).
Fig. 7
To replace the rear lamp
Disconnect the oven from the power supply.1.
Unscrew the lamp cover (Fig. 8), replace 2.
the lamp (see note for lamp type) and
screw the lamp cover back on.
Fig. 8
Reconnect the oven to the power supply.3.
NOTE:
Only use 25-40W/230V type E-14, T300°C
incandescent lamps.
Lamps are available from IKEA After Sales
Service.
IMPORTANT: using halogen lamps, do
not handle with bare hands since
ngerprints can damage them.
Do not use the oven until the lamp cover has
been repositioned.
