468480
4
Zoom out
Zoom in
Previous page
1/4
Next page
5019 618 33115/A
The hood is designed for use in “Extractor version” or in
“Filter version
Extractor Version
(see symbol in installation handbook)
fumes are extracted and expelled to the outside through a
fumes exhaust hose (not supplied) fixed to the collar at the top
of the hood.
In accordance with the exhaust hose purchased, provide a
suitable fixing system to secure it to the collar.
Warning: If already installed, remove the carbon filter/s.
Filter Hood
(see symbol in installation handbook)
Air is filtered through a carbon filter/s and recycled into the
surrounding environment.
Warning: check that air recirculation is facilitated (to this end,
carefully follow the instructions given in the installation
handbook)
Warning! If the hood does not have a carbon filter/s, order
one/them and fit it/them before use.
The hood comes provided with hardware (e.g.: screws and/or
plugs) suitable for most walls/ceilings. However, a qualified
technician is needed to make sure that such hardware is
suitable for your wall/ceiling. The wall/ceiling must be strong
enough to take the weight of the hood.
Extremely heavy product; hood handling and
installation must be carried out by two or more
persons.
DESCRIPTION OF THE HOOD
1. Control panel.
Light :
move the button to the right.
Extraction speed :
move the button to the right to increase power/speed.
2. Grease filters.
3. Lamp covers (or halogen lamps, depending on the
model).
4. Telescopic flue.
Grease filters:
Metal grease filters have an unlimited
life and should be washed once a
month either by hand or in a
dishwasher at a low temperature and
with a short cycle. Washing in a
dishwasher can cause grease filters to
turn white, but this in no way affects
efficiency.
a. Press the handle to release the filter
b. remove the filter.
Wash the filter and leave it to dry, proceeding in reverse
order to refit it.
Bulb/s:
Remove the filters and remove the
burnt-out bulb.
Refit the filters.
Halogen bulbs:
Use a small screwdriver or other
suitable tool to prise off the cover.
Snap-fit the cover back on.
Use only max 40 W max - E14
bulbs or max 12V-20W- G4 halogen bulbs (depending
on the model), taking care not to touch them with
your hands.
Fitting or replacing the carbon filter (filter hoods only).
Change the carbon filter every four months.
1. Remove the grease filters.
2. Fit the filter/s over the motor according to the model:
•align the pins R on the cowl with the slots S, then
turn the filter clockwise until it locks in place.
3. Reverse the above procedure to remove the carbon
filter.
4. Refit the grease filters.
Cleaning the hood
Warning! Failure to remove oil and grease (at least once a
month) could lead to fire.
Use a soft cloth with a neutral detergent. Never use abrasive
substances or alcohol.
4
2
3
3
1
a
b
GB
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ikea DATID HW400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ikea DATID HW400 in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ikea DATID HW400

Ikea DATID HW400 Installation Guide - Dutch - 28 pages

Ikea DATID HW400 User Manual - Dutch - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info