468482
5
Zoom out
Zoom in
Previous page
1/13
Next page
21
For the indispensable introduction of fresh air in the room, a
similar opening of at least 100 cm
2
directly to the outside must be
provided at a height near floor level so as not to be obstructed on
the inside or outside of the wall and not to hinder the correct
combustion of the burners and the regular extraction of vitiated
air, and with a height difference of at least 180 cm with respect to
the outlet opening.
The quantity of air necessary for combustion must not be less
than 2 m
3
/h for every kW of power (see total power in kW on the
appliance rating plate).
In all other cases, when there are other appliances in the same
room, or when direct natural ventilation is not possible and
indirect natural ventilation of forced ventilation has to be created,
contact a qualified specialist for carrying out installation and
preparing the possible ventilation system in strict compliance with
current regulations.
Flues already used by other appliances must not be used for
exhausting combustion products.
Electrical connection
Before connecting the appliance, make sure that:
1. the house electrical power supply nominal voltage matches that of the appliance, as given on the rating plate;
2. the power supply line to which the appliance is connected is of adequate power with respect to the
max. power absorbed by the appliance, as given on the rating plate;
3. the house electrical system has a correct grounding system.
An omnipolar switch with a distance of at least 3 mm between contacts must be installed.
NB: After installation, the electrical components must only be accessible with the use of a special tool.
The power cord must be of the H05RR-F type, in compliance with the table given below.
Instructions for the installer
Instructions
Disconnect the power plug and close the gas tap before carrying out any repairs or
operation.
The qualified technician is responsible for correct installation according to current safety
regulations.
Grounding of the appliance is compulsory by law.
The Manufacturer declines any responsibility for possible damage to persons, animals or things due to
non-compliance with the above mentioned regulations. The technical data is given on the rating plate
located on the inside of the drawer door. The adjustment conditions are given on a label applied on the
packing. Do not use the oven door handle grip for handling operations, or for removing the appliance
from the packing.
The appliance is in class 1.
POWER SUPPLY VOLTAGE NUMBER OF WIRES x DIMENSIONS
1N ~ 230 V 3 x 1.5 mm²
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ikea DATID CG7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ikea DATID CG7 in the language / languages: English as an attachment in your email.

The manual is 2,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ikea DATID CG7

Ikea DATID CG7 Quick start guide - English - 4 pages

Ikea DATID CG7 User Manual - Dutch - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info