507164
7
Zoom out
Zoom in
Previous page
1/64
Next page
Bridge function
The Bridge function connects two cooking
zones and they operate as one.
First set the heat setting for one of the cook-
ing zone.
To activate the Bridge function touch
. To
set or change the heat setting touch one of
the control sensors.
To deactivate the Bridge function touch
.
The cooking zones operate independently.
Using the Booster function
The Booster function makes additional pow-
er available to the induction cooking zones.
Touch
to switch it on, a lights up on a
display. After maximum 10 minutes, the in-
duction cooking zones automatically return
to cooking level
.
Power management
The power management shares the maxi-
mum available power between two cooking
zones generating a pair (see picture). Boos-
ter function can cause, that the maximum
available power for a pair is exceeded.
Then the second cooking zone will be auto-
matically reduced to a lower power level.
The display for the reduced zone alternates
between selected and maximum available.
Using the Timer
Touch
repeatedly until the pilot light of a
desired cooking zone displays. For exam-
ple,
for the front left zone.
Touch or of the Timer to set the time
between
00
and
99
minutes. When the pi-
lot light flashes more slowly, the time counts
down. Set the heat settings.
If the heat setting is set and the time set has
elapsed, acoustic signal appears,
00
flash-
es, and cooking zone switches off. If cooking
zone is not in use and the time set has
elapsed acoustic signal appears and
00
flashes.
Select
for a cooking zone to switch off
the function, and the pilot light of the cook-
ing zone selected flashes faster. Touch
and the remaining time counts backwards
to
00
. The pilot light goes out.
STOP+GO
The Stop+Go function sets all cooking zones
that operate to the lowest heat setting (
).
When Stop+Go operates, you cannot
change the heat setting.
The Stop+Go function does not stop the tim-
er function.
To activate this function touch
. The
symbol
comes on.
To deactivate this function touch
. The
heat setting that you set before comes on.
Lock
When the cooking zones operate, you can
lock the control panel, but not
. It pre-
vents an accidental change of the heat set-
ting.
First set the heat setting.
To start this function touch
. The symbol
comes on for 4 seconds.
The Timer stays on.
ENGLISH 7
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ikea AVENTYRLIG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ikea AVENTYRLIG in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 10,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ikea AVENTYRLIG

Ikea AVENTYRLIG Installation Guide - Dutch - 20 pages

Ikea AVENTYRLIG User Manual - Dutch, Portuguese, Spanish - 60 pages

Ikea AVENTYRLIG Installation Guide - All languages - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info