676191
10
Zoom out
Zoom in
Previous page
1/84
Next page
ENGLISH 10
Start protection / Safety lock
This automatic safety function is activated
one minute after the oven has returned to
“stand by mode“. (The oven is in “stand by”
when the 24-hour clock is displayed or if the
clock has not been set, when the display is
blank).
Open and close the door, then press
F
to
start the function.
Cooling down
When a function is nished, the oven may
carry out a cooling procedure. This is normal.
After this procedure the oven switches off
automatically.
The cooling procedure can be interrupted
without any harm to the oven by opening the
door or pressing the
C
Button.
Setting the timer
Use this function when you need a kitchen
timer to measure exact time for various
purposes such as cooking eggs or letting the
dough rise before baking etc.
GFA
Daily use
1. Push the
A
knob out and turn it until zero
position.
2. Push the
G
knob out and turn it to set the
desired length of the timer.
3. Press the
F
button.
An acoustic signal will be heard when the
timer has nished to count down.
Pressing any button to turn off the acoustic
signal
WARNING : Overheating the liquid beyond
boiling point can occur without evidence
of bubbling. This could result in a sudden
boil over of the hot liquid. To prevent this
possibility the following steps should be
taken :
1. Avoid using straight-sided containers
with narrow necks.
2. Stir the liquid before placing the
container in the appliance and let the
teaspoon remain in the container.
3. After heating, allow standing for a short
time, stirring again before carefully
removing the container from the
appliance.
Jet start
This function is used for quick reheating of
food with a high water content such as; clear
soups, coffee or tea.
With the knob in the upright postion, press
Start button to switch on the Jet Start
function.
a lower level after 1 minute. If the ECO
mode is off, the brightness will switch to
the same lower level after 3 minutes. It
will automatically switch back to the set
brightness level when a button is pressed or
the door is opened.
Brightness
GF
1. Press the
F
button.
2. Push the
G
knob out and turn it to set
the level of brightness suitable to your
preference.
3. Press the
F
button again to conrm the
change.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ikea Anratta 704.117.67 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ikea Anratta 704.117.67 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 8,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ikea Anratta 704.117.67

Ikea Anratta 704.117.67 User Manual - Dutch, Portuguese, Spanish - 78 pages

Ikea Anratta 704.117.67 Additional guide - All languages - 124 pages

Ikea Anratta 704.117.67 Installation Guide - All languages - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info