764382
5
Zoom out
Zoom in
Previous page
1/92
Next page
5
IMPORTANT:
STARKVIND air purier can be used as a standalone
device and also works together with TRÅDFRI
Gateway and the IKEA Home smart app.
QUICK GUIDE
IfyouhaveanIOSdevice:
Go to the App Store and download the IKEA Home
smart app. The app will take you through the
process of adding STARKVIND air purier to your
TRÅDFRI Gateway.
IfyouhaveanAndroiddevice:
Go to Google Play and download the IKEA Home
smart app. The app will take you through the
process of adding STARKVIND air purier to your
TRÅDFRI Gateway.
Pairing: Adding STARKVIND air purier to your
TRÅDFRI Gateway.
STARKVINDairpuriertable:
You will nd the pairing button by removing the
tabletop.
The range between the gateway and the receiver
are measured in open air.
Dierent building materials and placement of the
units can aect the wireless connectivity range.
If the app can't connect your air purier to the
gateway, then try to move the air purier closer to
your gateway.
Fan speed control
The fan speed can be regulated between 1 to 5 and
Auto mode.
Auto mode
In Auto mode, the product selects the fan speed in
accordance with the ambient air quality.
The air quality sensor is active and measures PM 2.5
particles when the air purier is running.
Only in the IKEA Home smart app.
Indicators for air quality (PM 2.5):
Green: 0-35 / Good
Amber: 36-85 / OK
Red: 86- / Not good
Operational temperature: 0°C to 40°C.
Humidity when operational: 10 to 60% RH
(Recommended operational humidity: 40-60% RH)
When STARKVIND air purier is connected to the
mains for the rst time, the LED lights on the
control panel light up in succession. When the LED
lights stop illuminating, the product is ready to use.
Press the control knob to put it in Auto mode, or
turn to the desired level. Press the knob again to
turn it o.
A long press activates the Control lock. It can also
be controlled from the app IKEA Home smart.
Care instructions
Unplug the product before cleaning.
To clean the product, wipe with a soft damp cloth.
Use another soft dry cloth to wipe dry.
Vacuum clean the pre-lter regularly.
Note!
Never use abrasive cleaners or chemical solvents
since these can damage the product.
Cleaningtheairqualitysensor
Vacuum clean the air quality sensor regularly.
Filter replacement
When replacing the lter, it is essential that the user
proceeds as follows:
One LED light illuminated on the control panel
indicates that you should check your lters.
1
AUTO
2
3
4
5
Warning!
The power supply cord must be disconnected
during lter replacement!
1. Disconnect the power and wait until the fan has
stopped.
2. Remove the pre-lter and clean the pre-lter with
a vacuum cleaner or with water depending on
how dirty it is.
3. Remove lter(s), and handle used lters carefully.
Dispose of the lter(s) in accordance with local
environmental regulations for waste disposal.
4. Clean the inside, removing all dust and dirt.
5. Insert the new lter(s). (Touch only the frame of
the gas lter).
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ikea 805.019.51 Starkvind at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ikea 805.019.51 Starkvind in the language / languages: All languages as an attachment in your email.

The manual is 4,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ikea 805.019.51 Starkvind

Ikea 805.019.51 Starkvind Installation Guide - All languages - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info