764352
11
Zoom out
Zoom in
Previous page
1/44
Next page
ENGLISH 11
What to do if ...
Before contacting the After-sales service:
Switch the appliance on again to see if the problem has
disappeared. If not, switch it o again and repeat the operation
after an hour.
If your appliance still does not work properly after carrying out
the checks listed in the troubleshooting guide and switching
the appliance on again, contact the After-sales service, clearly
explaining the problem and specifying:
the type of fault;
the model;
the type and serial number of the appliance (given on the
rating plate);
the Service number (the number after the word SERVICE on
the rating plate inside the appliance).
Problem Possible causes: Solutions:
The control panel is switched o, the
appliance does not work.
The appliance may be in On/Stand-by mode.
There may be an appliance power supply
problem.
Turn the appliance on pressing the On/
Stand-by button. Make sure:
- there is not a power outage
- the plug is properly inserted in the power
socket and the mains double-pole switch
(if present) is in the correct position (i.e.
allows the appliance to be powered)
- the household electrical system
protection devices are ecient
- the power cable is not broken.
The internal light does not work. The light may need replacing.
The appliance may be in On/Stand-by mode
- Contact the authorised Technical
Assistance Service.
- Turn the appliance on pressing the On/
Stand-by button
The temperature inside the compartment is not
cold enough.
There could be various causes (see “Solutions”)
Make sure:
- the door close properly
- the appliance is not installed near a heat
source
- the set temperature is adequate
- the circulation of air through the
ventilation grilles on the base of the
appliance is not obstructed.
The front edge of the appliance, at the door
striker seal, is hot.
This is not a defect. It prevents condensation
from forming.
No solution is necessary.
The red
F
icon is ashing and a sound signal
is activated
Door open alarm
It is activated when the door remains open for
a prolonged period of time.
To turn the sound signal o, close the door
of the product.
The red
F
icon will light up, a sound signal is
activated and the letter “F” is ashing on the
display.
Malfunction alarm
The alarm indicates the malfunction of a
technical component.
Call the authorized Technical Assistance
Service. To turn the sound signal o,
briey press the “Turn o sound alarm”
F .
The Temperature display blinks (°C) and
the Alarm Indicator remains on.
Temperature alarm
The inside temperature is not adequate.
Press the Stop Alarm button F ; the
acoustical alarm stops, the Temperature
Display (°C) blinks and the Alarm Indicator
F remains on until a temperature <-10°C
is reached.
The Black Out Alarm E icon remains on,
the Alarm indicator F blinks and the
Temperature display (°C) blinks, showing
the maximum temperature reached
during blackout.
Long Black-Out alarm
Prolonged power failure, able to cause the
inside temperature to increase to 0°C.
Press the Stop Alarm button F ; the
acoustical alarm stops, the Temperature
Display (°C) blinks
and the Alarm Indicator F remains on
until a temperature <-10°C is reached.
Note:
Gurgling, hissing and humming noises from the refrigerating system are normal.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ikea 805.014.18 Frysa at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ikea 805.014.18 Frysa in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ikea 805.014.18 Frysa

Ikea 805.014.18 Frysa User Manual - Dutch - 44 pages

Ikea 805.014.18 Frysa User Manual - Danish - 44 pages

Ikea 805.014.18 Frysa User Manual - Portuguese - 44 pages

Ikea 805.014.18 Frysa User Manual - Swedish - 44 pages

Ikea 805.014.18 Frysa User Manual - Spanish - 44 pages

Ikea 805.014.18 Frysa User Manual - Norwegian, Finnish - 44 pages

Ikea 805.014.18 Frysa Installation Guide - All languages - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info