311703
4
Zoom out
Zoom in
Previous page
1/13
Next page
58
TRANSIT SCREWS
The appliance is fitted with two transit screws and
a transit bar to prevent internal damage while it is
being moved.
Before using the appliance the transit screws
and transit bar MUST be removed.
The appliance is fitted with two screws and a
transit bar.
1. Remove the black screw (A) with a
screwdriver.
2. Unscrew the screw (B) on the red transit bar
with a screwdriver.
3. Completely withdraw and remove the transit
bar (C) by pulling firmly on the red handle.
.
Keep the screws and the bar for future use.
Note: Refit the transit screws and transit bar before transporting the appliance by repeating the above
steps in reverse order. In order to locate the screws and bar correctly, it will be necessary to remove the
appliance top, having first made sure that the appliance is disconnected from water and electricity
supplies.
INSTALLATION
Install the appliance on a solid and level floor
surface, preferably in a corner of the room.
Make sure that all four feet are resting firmly
on the floor and check that the appliance is
perfectly level (use a spirit level).
If the floor is uneven, adjust the levelling feet
as required (do not insert pieces of wood,
cardboard etc. under the feet).
1. Slacken the locknut.
2. Adjust the height of the foot, turning it by
hand.
3. Tighten the locknut anticlockwise towards
the washing machine.
If the appliance is to be installed on a wooden
floor, distribute the weight by placing it on a
60x60 cm sheet of plywood at least 3 cm in
thickness. Secure the plywood sheet to the floor.
WATER SUPPLY
Water supply: only cold water.
Tap: 3/4” threaded hose connector.
Water pressure (mains pressure):
10-100N/cm
2
(1-10bar).
INLET HOSE
Carefully screw the inlet hose to the tap by
hand.
Turn the tap on fully and check that the joints
at the washing machine and the tap are
watertight.
t
If the hose is not long enough, replace it with
a suitable length of pressure-resistant hose
(approved under EN50065 to withstand a
minimum of 10bar).
Check the hose regularly for brittleness and
cracks and replace if necessary.
The washing machine may be connected
without a non-return valve.
Observe any special local regulations
regarding connection to the water supply.
INSTALLATION
00003gb.fm5 Page 58 Wednesday, May 10, 2000 5:12 PM
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ignis awv 616 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ignis awv 616 in the language / languages: English as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ignis awv 616

Ignis awv 616 Quick start guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info