311699
8
Zoom out
Zoom in
Previous page
1/17
Next page
25
SELECTING THE PROGRAMME
(See also the separate programme chart and
consumption data)
For appliances WITH temperature
selector knob
1.
Turn the programme selector knob
clockwise to the desired programme.
2.
Set the temperature knob to the desired
temperature.
For appliances WITHOUT temperature
selector knob
Turn the programme selector knob clockwise to
the programme with the desired temperature.
PRESS THE DESIRED SPECIAL OPTION
BUTTON
(Depending on model, see also the separate
programme chart).
Spin speed reduction button
Press this button to reduce the spin speed.
No spin button
Press this button to exclude the spin function
from the programme.
Rinse hold/Spin delay button
The laundry remains in the last rinse water
without being spun, to avoid heavy creasing.
Especially suitable for the Synthetic or
Delicate programmes, if the laundry is not
to be unloaded immediately after the end of
the programme.
Stopping Rinse hold:
Press the Rinse hold button again; the load
will be spun according to the selected
programme.
Lightly soiled/Half load button
Reduces water consumption, above all
during the rinse.
Especially suitable for lightly soiled or small
loads (reduce the detergent quantity).
Cold wash button
The water is used at the water supply
temperature.
Intensive rinse button
This function is especially suitable in areas
with extremely soft water, for baby clothes
and to help people with allergies.
In the rinsing cycle approx. 10 l more water
are used.
This special function is recommended for the
95°C Cotton and 60°C Synthetic
programmes, since in this way the wash
water is cooled before drainage.
95°C Cotton
This function can be selected in the Cotton
programme.
Suitable for fabrics with this symbol on the
label.
Recommended only for heavily soiled
laundry.
PROGRAMME START
1.
Plug in the appliance.
2.
Turn on the water supply tap.
3.
Press the ON/OFF button.
DOOR LOCK
The door locks automatically after the
programme start until the end of the programme.
PROGRAMME END
The programme sequence indicator is at Stop.
1.
Press the ON/OFF button.
2.
Cancel the special options by pressing the
appropriate buttons.
3.
Turn the water supply tap(s) off.
4.
Wait for the door to unlock (about 2 minutes).
5.
Open the door and unload the machine.
Note:
Do not fully close the door but leave it ajar
to allow the drum to dry out.
PROGRAMME RESELECTION
1.
Press the ON/OFF button.
2.
Select the new programme, temperature and
relative options.
3.
Press the ON/OFF button.
SELECTING THE PROGRAMME
AND SPECIAL OPTIONS / PROGRAMME START
A
B
A
B
DOOR LOCK / PROGRAMME END / PROGRAMME RESELECTION
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ignis awp 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ignis awp 200 in the language / languages: English as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ignis awp 200

Ignis awp 200 User Manual - German - 15 pages

Ignis awp 200 User Manual - Dutch - 15 pages

Ignis awp 200 User Manual - French - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info