304046
15
Zoom out
Zoom in
Previous page
1/17
Next page
34
Intensive rinse button
This function is especially suitable in areas with
extremely soft water, for baby clothes and to
help people with allergies.
In the rinsing cycle approx. 10 l more water are
used.
This special function is recommended for the
95°C Cotton and 60°C Synthetic
programmes, since in this way the wash water
is cooled before drainage.
95°C Intensive wash
This function can be selected in the Cotton
programme.
Suitable for fabrics with this symbol on the label.
Recommended only for heavily soiled laundry.
PROGRAMME START
1.
Plug in the appliance.
2.
Turn on the water supply tap.
3.
Press the ON/OFF button.
N.B.:
In order to reduce power and water
consumption, the amount of water used is
optimised according to the size and type of load.
If you want to increase the amount of water used
for Cotton washes, use the programmes that
include a prewash
.
The door locks automatically after the programme
start until the end of the programme.
PROGRAMME END
The programme sequence indicator is at Stop.
1.
Press the ON/OFF button.
2.
Cancel the special options by pressing the
appropriate buttons.
3.
Turn the water supply tap(s) off.
4.
Wait for the door to unlock (about 2 minutes).
5.
Open the door and unload the machine.
Note:
Do not fully close the door but leave it ajar to
allow the drum to dry out.
PROGRAMME RESELECTION
1.
Press the ON/OFF button.
2.
Select the new programme, temperature and
relative options.
3.
Press the ON/OFF button.
WHEN TO REMOVE THE FILTER / DRAIN
RESIDUAL WATER
Caution:
Some models do not have a filter for
foreign bodies, as they are fitted with a special
self-cleaning pump. If this is the case, please
ignore the following section.
Check and clean the filter at least 2 or 3 times
a year.
When the appliance does not drain or spin
properly.
When the pump is blocked by an object
(buttons, coins, safety pins).
Important:
Before draining, make sure that
the water has cooled.
REMOVING THE FILTER
1.
Switch off the appliance
(press the ON/OFF button).
Open the filter cover with the coloured insert
from the detergent drawer.
3.
Place a tub or container beneath it.
Slowly turn the filter anticlockwise until its
handle is vertical without unscrewing it
completely.
5.
Wait until all the water has drained.
Now unscrew the filter completely and
remove it.
7.
Remove any foreign material from the filter.
8.
Check that the pump rotor moves freely.
9.
Insert the filter and screw it in clockwise until
it locks (until the grip is horizontal).
10.
Close the cover.
11.
Pour 1/2 litre of water into the detergent
drawer to reactivate the Eco system.
WHEN TO DRAIN RESIDUAL WATER
When transporting (moving) the machine.
If there is danger of freezing in the installation
room. In this case the machine should be
drained after every wash.
SELECTING THE PROGRAMME AND
SPECIAL OPTIONS / PROGRAMME START
DOOR LOCK / PROGRAMME END /
PROGRAMME RESELECTION
REMOVING THE FILTER / DRAINING RESIDUAL WATER
2.
4.
6.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ignis awp 093 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ignis awp 093 in the language / languages: English as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ignis awp 093

Ignis awp 093 User Manual - English - 17 pages

Ignis awp 093 User Manual - German - 17 pages

Ignis awp 093 User Manual - Dutch - 17 pages

Ignis awp 093 User Manual - French - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info