304045
11
Zoom out
Zoom in
Previous page
1/15
Next page
28
The appliance will not switch on
Power plug properly inserted in mains
socket?
Mains fuse OK?
Power failure?
Tap turned on? Is water coming through?
Door closed?
Programme selected?
ON/OFF button pressed?
No water or insufficient water supply
Tap turned on completely?
Kink in water hose?
Water hose filter clogged? (See Care and
Maintenance).
Water hose frozen up?
Waste water not pumped out
Drain hose installed correctly? (See
Installation Instructions).
Filter clogged? (See Removing the filter /
draining residual water).
Drain hose frozen up?
Is the rinse hold button pressed?
Detergent and additive product residues in
detergent drawer at end of wash
Siphon installed correctly?
Siphon clogged?
Not enough water delivered? (See above).
Also see Detergent and additives and Care
and Maintenance.
Machine vibrates during spin cycle
Machine perfectly horizontal with all four feet
on ground? (See Installation Instructions).
Transit bolts removed? The transit bolts must
be removed before the machine is used (see
Installation Instructions).
Final spin results are poor
Pump impeller obstructed? (See Removing
the filter / draining residual water).
Wash consists of a single heavy/large size
article (bathrobe, etc.)? If this is the case the
wash machine may detect load imbalance
and activate the spin cycle at reduced speed.
In this case add further garments and repeat
the spin cycle.
If the load is too wet at the end of the
programme, add further garments and run a
new spin cycle.
Before contacting After-Sales Service:
1.
Try to remedy the problem (see
Troubleshooting Guide).
2.
Restart the programme to see if the fault is
repeated.
3.
If the malfunction persists, call After- Sales
Service and specify:
The nature of the problem
The exact model of the appliance
The service code
(number after the word SERVICE).
The After-Sales Service sticker is on the
inside of the door.
Your full address
Your telephone number and area code.
The After-Sales Service telephone number
and address can be found in the warranty or
on application to the retailer.
TROUBLESHOOTING GUIDE
AFTER-SALES SERVICE
11


Need help? Post your question in this forum.

Forumrules
1

Forum

ignis-awp-092

Reset search

  • The ignis washing machine type eco today is always showing sign of open when all have been set for washing while well closed
    I don't know why it's presenting always open while it's well closed Submitted on 20-9-2021 at 15:22

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ignis awp 092 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ignis awp 092 in the language / languages: English as an attachment in your email.

The manual is 0,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ignis awp 092

Ignis awp 092 User Manual - English - 17 pages

Ignis awp 092 User Manual - German - 15 pages

Ignis awp 092 User Manual - Dutch - 17 pages

Ignis awp 092 User Manual - French - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info