462091
10
Zoom out
Zoom in
Previous page
1/14
Next page
GB 10
TROUBLESHOOTING GUIDE
The appliance is fitted with automatic safety functions that detect faults at an early stage and allow the safety
system to react appropriately. These faults are frequently so minor that they can be dealt with a few minutes.
Problem Causes, Solutions, Suggestions
The machine will not
turn on and no lamps
are lit
The plug has not been properly inserted in the socket.
The socket or fuse is faulty (use another lamp or electrical device to test the
socket).
The “On/Off” switch (if present) has not been pressed.
The machine will not
start even though the
“Start” button has been
pressed
The door has not been closed correctly.
The machine stops
during the programme
and the “Start” light
flashes
The “Rinse Hold” function (if present) is turned on and the Anticrease
light goes on in the programme sequence indicator; terminate “Rinse
Hold” by pressing the
“Start”
button or by choosing and starting the
“Drain” programme.
the programme has been changed: select the new programme and press
“Start”
.
The programme has been interrupted and the door opened: close the door
and re-start the programme by pressing
“Start”
.
The appliance’s safety system has been activated (see “Description of red
indications”).
The water tap is not open or the water inlet hose is kinked (“Water tap
closed” indication lights up).
The dispenser contains
detergent and/or
additive residue
The separator in the main wash chamber has not been correctly fitted or is
not suitable for the use of powder and liquid detergents (see “Detergents and
additives”).
The water level is insufficient; the mesh filters of the water supply may be
blocked (see “Care and maintenance”).
The washing machine
vibrates during the spin
cycle
The transport bolts have not been removed;
Before using the machine, it
is imperative that the transport bolts are removed.
The appliance is not level/not standing firmly on all four feet (see separate
“Installation Guide”).
Final spin results are
poor
The washing machine has an imbalance detection and correction system. If
individual heavy items are loaded (e.g. bathrobes), this system may reduce the
spin speed automatically or even interrupt the cycle in order to protect the
washing machine .
Heavy items may prevent the spin cycle from being carried out; add small
items and repeat the spin cycle.
The excessive formation of foam may prevent the spin cycle from being
carried out; select and start the “Rinse & Spin” programme. Avoid using
excessive amounts of detergent (see “Detergents and additives”).
The “Variable Spin” button (if present) has been set to a low spin speed or
the “No Spin” option (if present) has been activated.
The programme time
initially shown on the
display can be
lengthened/shortened
by a given amount of
time (only on appliances
with a display indicating
remaining programme
time)
It is normal for the washing machine to adjust to factors that might affect the
duration of the wash cycle, e.g. the excessive formation of foam, an
unbalanced load of very heavy items or extended heating time due to a low
water temperature.
For reasons like these, the wash time is recalculated and up-dated if necessary.
On some displays (depending on the model), an animation appears
during such update periods.
50120023GB.fm Page 10 Thursday, January 8, 2009 6:41 PM
Black process 45.0° 150.0 LPI
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ignis AWF 595 IG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ignis AWF 595 IG in the language / languages: English as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ignis AWF 595 IG

Ignis AWF 595 IG User Manual - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info