340943
12
Zoom out
Zoom in
Previous page
1/12
Next page
N C
M Y
Congratulations!
This appliance offers you top technical features combined with m aximum comfort and performance.
This new appliance is designed to the highest technical standards. Your appliance is equipped with energy-saving devices
that allow you to behave in an environment-friendly way.
Good reading and .....
Thanks!
“Warning - this appliance must
be earthed”
Fuse replacement.
If the mains lead of this appliance is fitted with a BS
1363A 13 amp fused plug, to change a fuse in this
type of plug use an A.S.T.A. approved fuse to BS
1362 type and proceed as follows:
1. Remove the fuse cover (A) and fuse (B).
2. Fit repl acement 13A fuse into fuse cover.
3. Refit both i nto plug.
Important:
The fuse cover must be refi tted when
changing a fuse and if the fuse cover is lost the
plug must not be used until a correct replacement
is fitted.
Correct replacement are identified by the colour
insert or the colour embossed in words on the base
of the plug.
Replacement fuse covers are available from your
local electrical store.
Connection to a rewireable plug
If the fitted plug is not suitable for your socket
outlet, then it should be cut off and disposed of in
order to avoid a possible shock hazard should it be
inserted into a 13A socket elsewhere.
A suitable altenative plug should then be fitted to
the cable.
The wires in this mains lead are coloured in
accordance with the following code;
BLUE - “NEUTRAL” (“N”)
BROWN - “LIVE” (“L”)
GREEN AND YELLOW - “EARTH” (“E”)
1. The GREEN AND YELLOW wire must be
connected to the terminal i n the plug which is
marked with the letter “E” or by the Earth symbol
or coloured green or green and yellow.
2. TheBLUEwiremustbeconnectedtothe
terminal which is marked with the letter “N” or
coloured black.
3. The BROWN wire must be connected to the
terminal which is marked with the letter “L” or
coloured red.
For the Republic of Ireland only
The information given in respect of Great Britain will
frequently apply, but a third type of plug and socket
is also used, the 2-pin, side earth type. In this case,
the wire which is coloured GREEN AND YELLOW
must be connected to the EARTH contact, and the
other two wires to the two pins, i rrespective of
colour. The supply to the socket must be fitted with
a16ampfuse.
GREEN AND
YELLOW (“E”)
BROWN (“L”)
CABLE CLAMP.
BLUE (“N”)
Connection to a
typical 13 amp plug
10
10
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ignis arl 273 g at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ignis arl 273 g in the language / languages: German as an attachment in your email.

The manual is 0,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ignis arl 273 g

Ignis arl 273 g User Manual - English - 9 pages

Ignis arl 273 g User Manual - Dutch - 9 pages

Ignis arl 273 g User Manual - French - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info